796935

Oregon Scientific WMR90A Manual

3
Zoom out
Zoom in
Previous page
1/24
Next page
3
EN
Humidity / Dew Point Area
1
2
3
4
5
6
1. Dew
point level - Temperature is showing
2. HI / LO humidity and Dew Point alarms are set
3. Comfort levels
4. Humidity trend
5. MAX / MIN humidity
6. Humidity reading
WIND SENSOR
1
2
5
6
3
4
1. Wind vane measuring the wind speed
2. Wind direction sensor
3. Battery compartment
4.
RESET
hole
5. North indicator
6. Plastic sleeve protecting the batteries
RAIN GAUGE
Base and funnel
1
2
3
1. Rain gauge
2. Battery compartment
3.
RESET
button
Tipping bucket rain gauge
1
2
1. Funnel
2. Level indicator
GETTING STARTED
SET UP REMOTE WIND SENSOR
The wind sensor can take 3 readings:
• The wind speed and directions
• The outdoor temperature (Channel 1 only)
• The outdoor relative humidity (Channel 1 only)
The sensor is battery operated and is capable of transmitting data to the base station
wirelessly within an approximate operating range of 100 meters (328 feet).
NOTE
For best results, ensure that the wind direction indicator on the wind sensor
points to the North to enable an accurate reading. The sensor also should be
positioned in an open area away from trees or other obstructions.
To set
up the wind sensor main body
:
1. Assemble the wind direction pointer on the top of the wind sensor.
2. Use the screw (Type B) to fi x.
3. Assemble the wind vanes on the top of the wind pointer.
4. Use the screw (Type B) to fi x.
1
2
2
2
2
3
5. Hold the wind sensor upright and rotate the protective sleeve to the left to unlock.
6. Slide the sleeve down to open the battery compartment.
7. Insert batteries (4 x UM-3 / AA) in the compartment, matching the polarity (+ / -)
and press
RESET
.
8. Slide the protective sleeve up to close the compartment.
9. Rotate the sleeve to the right to lock.
7
5
5
5
5
8
9
9
9
6
6
To set up the wind sensor main body on an existing pole:
1. Remove the screw that fi xes the plastic connector at the end of the top pole.
2.
Remove the plastic connector by sliding it off the pole.
3.
Insert the pole into the plastic base.
3
3
1
1
2
2
4.
Insert the screw into the plastic base and pole and secure using the Type B
screw and washers.
5.
Align the back of the plastic base to an existing pole.
6.
Using the 2 U-bolts, secure the plastic base to the pole by inserting the ends of
the U-bolts into the holes on the plastic base and securing it with washers and
bolts.
7.
Slide Integrated wind sensor into the plastic base and pole.
8.
Insert and screw the Type “X” bolt into the hole.
7
7
7
7
7
7
9
9
5
6
6
6
9. Slide the battery cover off.
10. Using a compass, rotate and align the wind direction sensor and the NORTH
indicator line to the North.
11. Press the RESET button.
12. Slide the battery cover up
13. Rotate the sleeve clockwise to clock the cover
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR90A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR90A in the language / languages: English as an attachment in your email.

The manual is 17.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info