There are some accessories provided in the package. There are two bottles (30ml capacity), two short tubes (for use with 10ml bottles, not provided) and two
long tubes (for 30ml bottle, provided).
Install the tube:
1. Lift the top of the main unit.
2. Choose the correct size tube to t for your bottle.
3. Insert the tube securely into the slot.
In case the provided tubes length cannot t for your bottles,
you may:
• Fill your essential oil into the 30ml bottles provided. Then
you can install and use with the long tubes provided in the
packaging.
Or
• Cut the tube into deserved length:
• Insert the tube into the bottle vertically unit it reaches bottom.
Cut the tube at a position that 10mm above the bottle opening.
Install the bottle:
Most standard size bottles will t the diffuser, however if your original bottle of essential oil does not t,
you can use our provided bottle to pour the essential oil into. Install one or two bottle(s) into top slot(s),
which can be sprayed in two directions.
• Firmly twist the bottle anti-clockwise into the top slot. Ensure the
tube is long enough to reach the essential oil in the bottle.
1. Do not dilute the essential oil with water.
2. For the best performance of the diffuser, please periodically check the volume of the essential oil
remaining in the bottle.
POWER SUPPLY
The aroma diffuser is powered by connecting the power adapter (provided in the packaging).
CONNECT TO POWER SOURCE
1. Plug the small end of the power adapter into the power jack at the rear of the main unit.
2. Insert the plug from the power adapter into an electrical socket.
1. Only use the power adapter supplied with this product. To order a replacement power adapter,
please contact our customer service.
2. The power adapter is intended to be correctly inserted into a vertical wall or oor mounted
power socket. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or in a cabinet outlet. The socket-outlet should be installed near the equipment and
should be easily accessible.
BATTERY INSTALLATION
The coin battery is intended for backup power use only, which can remain a basic time display and the
LCD display for setup. You cannot start the main unit without the mains power supply.
1. Use a coin to counter-clockwise open the battery compartment cover.
2. Install a new battery, CR2032 button battery (provided).
3. Replace the battery compartment cover and rmly close it in a clockwise direction.
LOCATION SELECTION
Before selecting a location to place the unit, consider the following:
• Ensure there is at least 15 cm between the unit and the closest object or wall. Object may be accumulated with essential oil if direct contact with the mist
for a prolonged period.
• Ensure there is at least 40 cm space above the top of the unit for ventilation purposes.
• Ensure the distance between the unit and wall socket is not longer than the power cord itself.
• Avoid close with electrical appliance to the unit.
• Not recommend to place the unit beside the bed. The diffusion of aroma essential oil mist is very strong to the breath.
The main unit should not be exposed to wet conditions. No objects lled with liquid, such as vases, should be placed onto the main unit.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Oregon Scientific WA328 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Oregon Scientific WA328 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.
The manual is 4.07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
