587079
1
Zoom out
Zoom in
Previous page
1/2
Next page
VRSX Q.S.Guide (086-003005-080)
EN
STOP-MODUS
MODE ARRÊT
Refer to the User Manual for more information.
Getting started:
1. Install the VR-Link Software (
-
>14).
2. Slide the Battery Switch to the “on” position.
3. Charge the battery - Attach the supplied
USB cable to the computer’s USB port
and the recorder’s digital terminal. PC
must be switched on before charging
will start.
NOTE: The battery status indicator will blink
when the battery is fully charged.
Begin Recording:
1. Slide the recording switch to “on” in any
mode (
-
>6).
2. When you want recording to stop, slide
the recording switch to “off”.
Play Back Messages:
1. Connect your earphone (
-
>10).
2. Press to exit STANDBY and enter
STOP mode.
3. Press or to select messages (
-
>9).
4. Press to start playback. Press to end.
Voice Recorder Settings:
1. To change recorder settings, in STOP
MODE press MENU to find the desired
function (
-
>11).
NOTE:
When the voice recorder will not be in use
for an extended period of time, slide the
battery switch “off’ to prevent battery
drainage.
Consulter le manuel d’utilisation pour plus
d’information.
Pour Commencer:
1. Installer le logiciel VR-Link (
-
>14).
2. Faites glisser le bouton de la batterie en
position ON (Il doit être en position ON
pour que la batterie se recharge).
3. Charger la Batterie - Brancher le câble USB
(fourni) à la porte USB de l’ordinateur et au
Dictaphone numérique. Le PC doit être
allumé pour que le chargement commence.
NOTE: Le voyant de la batterie clignotera
lorsque la batterie est complètement chargée.
Pour enregistrer:
1. Faire glisser la touche d’enregistrement en
position ON dans n’importe quel mode (
-
>6).
2. Quand vous voulez interrompre
l’enregistrement, faites glisser la touche
d’enregistrement en position OFF.
Lecture des messages:
1. Brancher les écouteurs (
-
>10).
Beachten Sie die Bedienungsanleitung für
ausführliche Informationen.
Inbetriebnahme:
1. Installieren der Voice-Recorder PC-Link-
Software (
-
>14).
2. Schieben Sie den Batterieschalter in die
on (ein) Position.
3. Laden der Batterie - Schließen Sie das mit-
gelieferte USB-Kabel am USB-Anschluss
des Computers und am digitalen Anschluss
des Voice-Recorders an. Der Ladevorgang
startet erst, wenn der PC eingeschaltet ist.
HINWEIS: Die Batteriestandsanzeige blinkt,
wenn die Batterie vollständig geladen ist.
Aufnahme starten:
1. Schieben Sie einfach in einem beliebigen
Modus den Aufnahme-Schalter in die
Stellung „on“ (
-
>6).
2. Zum Anhalten der Aufnahme schieben Sie
den Aufnahme-Schalter in die Stellung „off“.
Nachricht wiedergeben:
1. Ohrhörer anschließen (
-
>10).
2. Bestätigen Sie die Taste , um den
Standby-Modus zu verlassen und in den
STOP-Modus zu gelangen.
3. Betätigen Sie die Taste oder um die
Nachricht auszuwählen (
-
>9).
4. Betätigen Sie die Taste . Betätigen Sie die
Taste , um die Wiedergabe zu beenden.
Einstellungen des Voice-Recorders:
1. Betätigen Sie zum Anwählen der gewün-
schten Funktion die MENU-Taste, um im
STOP-Modus die Geräteeinstellungen
zu ändern (
-
>11).
HINWEIS:
Wenn der Voice-Recorder längere Zeit nicht
benutzt wird, schieben Sie den Batterieschalter
auf OFF (Aus), um zu verhindern, dass der
Batterie Strom entzogen wird.
Per maggiori informazioni consultare il Manuale
dell’utente.
Operazioni preliminari:
1. Installazione del software Voice Recorder
Link (
-
>14).
2. Spostare l’interruttore della batteria sulla
posizione on.
3. Caricamento della batteria - Collegare il cavo
USB in dotazione alla porta del computer e
al terminale digitale del registratore. Il PC
deve essere acceso prima che abbia inizio
il caricamento.
NOTE: Quando la batteria è completamente
carica, il relativo indicatore di stato lampeggia.
Inizio della registrazione:
1. È sufficiente portare l’interruttore su On,
in qualsiasi modalità (
-
>6).
2. Per interrompere la registrazione, portare
l’interruttore su Off.
Riascolto dei messaggi:
1. Connessione dell’auricolare (
-
>10).
2. Premere per uscire dalla modalità di
standby e passare a quella di stop.
3. Selezionare il messaggio premendo
o (
-
>9).
4. Premere per iniziare la riproduzione.
Premere per terminare la riproduzione.
Impostaziomi del registratore:
1. Per modificare le impostazioni del regist-
ratore, in modalità STOP premere MENU
per individuare la funzione desiderata (
-
>11).
NOTE:
Quando il registratore vocale non viene
utilizzato per un lungo periodo, spegnere
l’interruttore batteria per evitare che le
batterie si scarichino.
VR636 Quick Start Guide
STOP MODE
FR
VR636 Guide de mise en marche rapide
2. Appuyer sur pour sortir du mode PAUSE
et entrer dans le mode ARRET.
3. Appuyer sur ou pour sélectionner
un message (
-
>9).
4. Appuyer sur pour commencer la lecture,
Appuyer sur pour arrêter.
Paramètres du Dictaphone numérique:
1. Appuyer sur le bouton MENU pour
accéder aux fonctions voulues (
-
>11).
NOTE:
Si l’enregistreur de voix n’est pas utilisé
pendant longtemps, faites glisser cette
touche en position “off” (éteint) afin de
prolonger la durée des batteries.
DE VR636 Kurzübersicht
IT
VR636 Guida rapida
MODALITÀ STOP
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific VR636 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific VR636 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific VR636

Oregon Scientific VR636 User Manual - English - 21 pages

Oregon Scientific VR636 User Manual - German - 21 pages

Oregon Scientific VR636 User Manual - Dutch - 21 pages

Oregon Scientific VR636 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info