589148

Oregon Scientific RRM112A Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
7
GB
HOW TO U
SE THE
SLEE
P (AUTO-OFF) FUNCTION
1. Turn on the radio.
2. Press [SLEEP] to activate the sleep function. "0 min" will be
displayed when the function is deactivated.
3. Press [SLEEP] again to select the sleep time for the radio to
switch off automatically. You can select 120, 90, 60, 30 or 15
minutes.
NOTE ON RADIO ALARM
When the radio alarm is set off, it will keep playing for two hours
before turning itself off. You can intervene by resetting the time for
the sleep function or simply turn off the radio at any time.
BATTERY INDICATION FOR RADIO
The [ ] icon indicates the battery level is low. The radio and radio
alarm can still be activated for a while. However it is recommended
to change the batteries for the radio.
The [ ] flashing icon indicates the battery has no power, neither
the radio nor the radio alarm can be activated.
The user selected radio station will be stored in the memory as long
as there are batteries in the unit (either for the clock or the radio).
SECTION 4
ADDITIONAL INFORMATION
THE RESET BUTTON
The [RESET] button is used to enhance synchronization of signals
after battery replacement or if the unit is malfunctioning.
Use a blunt stylus to hold down the button. All settings will return
to their default values.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
handled carefully.
1. Do not immerse the unit in water.
2. Do not clean the unit with abrasive or corrosive materials.
3. Do not subject the unit to snow or excessive force, shock, dust,
temperature or humidity.
4. Do not tamper with the unit’s internal components.
5. Do not mix new and old batteries or batteries of different
specifications.
To maintain good performance
• Particularly, do not keep the unit near bathrooms, heaters, and
areas exposed to direct sunlight (e.g. inside a parked car).-
• Keep cassette tapes, magnetic cards and other magnetic recorded
materials away from the speaker as the recorded information
may be erased or noise may occur on cassette tapes.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RRM112A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RRM112A in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info