589144

Oregon Scientific RMW128C Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
3
GB
Press ZONE to display the 2nd zone-time and calender. After 3
seconds the display will return to the Time with seconds display
mode.
ABOUT RADIO RECEPTION
When the unit is within range of its respective radio signals, its
radio-control mechanism will override all manual settings unless
the auto-reception function is mannally disabled by the users.
When the unit is receiving radio signal, the RADIO RECEPTION
icon [ ]will start to blink. A complete reception generally takes
about 2 to 10 minutes, depending on the strength of the radio signal.
After that, the periodical scanning will only take a few seconds.
When the reception is complete, the icon will stop blinking.
For better reception of radio signals, place the watch away from
metal objects and electrical appliances to minimize interference.
To improve the signal reception place the watch on a stable surface
as shown:
TO ENABLE OR DISABLE AUTO-
RECEPTION
If you wish to disable the auto-reception feature while the unit is
within range, press and hold the SPLIT (DOWN) button for 2
seconds. The antenna indicator will disappear and the unit will
NOT respond to radio signals.
To enable the feature again, press and hold the START/STOP (UP)
button for 2 seconds. The antenna indicator will start blinking to
initiate reception automatically.
SETTING THE CALENDAR CLOCK
MANUALLY
When the unit is not within range of the radio signal, you can set the
time and calendar manually.
1. Press and hold the MODE button for 2 seconds.
2. Enter the year using the START/STOP (UP) or SPLIT (DOWN)
buttons. Hold down either button to rapidly increase or decrease
the value.
3. Press the MODE button to confirm the entry.
4. Enter the months using the START/STOP (UP) or SPLIT
(DOWN) buttons. Press the MODE button to confirm the entry.
5. Follow the same pattern to set the days, hours, minutes, seconds
and 2
nd
time-zone hour-offset (+/- 12 hours).
6. For second-setting, if its value is between 0 to 29, press either
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RMW128C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RMW128C in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info