589143
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
GB
TO ENABLE OR DISABLE AUTO-
RECEPTION
If you wish to disable the auto-reception feature while the unit is
within range, press and hold the SPLIT (DOWN) button for 2
seconds. The antenna indicator will disappear and the unit will
NOT respond to radio signals.
To enable the feature again, press and hold the START/STOP (UP)
button for 2 seconds. The antenna indicator will start blinking to
initiate reception automatically.
SETTING THE CALENDAR CLOCK
MANUALLY
When the unit is not within range of the radio signal, you can set the
time and calendar manually.
1. Press and hold the MODE button for 2 seconds.
2. Enter the year using the START/STOP (UP) or SPLIT (DOWN)
buttons. Hold down either button to rapidly increase or decrease
the value.
3. Press the MODE button to confirm the entry.
4. Enter the months using the START/STOP (UP) or SPLIT
(DOWN) buttons. Press the MODE button to confirm the entry.
5. Follow the same pattern to set the days, hours, minutes, seconds
and 2nd time-zone hour-offset (+/- 12 hours).
6. For second-setting, if its value is between 0 to 29, press either
START/STOP (UP) or SPLIT (DOWN) button will return to
the present minute. If its value is between 30 to 59, it will proceed
to the next minute. (e.g., when the time is 12:46:28, it will return
to 12:46:00; when the time is 12:46: 48, it will go to 12:47:00).
7. For the 2nd time-zone setting, please note that the 2nd time-
zone hour-offset function comes with automatic Daylight Saving
Time (DST) compensation. When the hour-offset is set from+1
to -12 hours, the 2nd zone-time will synchronize with DCF-DST
and be adjusted automatically. However, when the hour-offset
is set from+2 to +12 hours, no DST compensation will be made.
8. Press the MODE button to save the changes and exit. The unit
will also save all changes and return to normal display
automatically after the unit has been left idle for 2 minutes.
ABOUT THE ALARM
To set the alarm:
1. In the Alarm time display mode, press and hold the MODE
button for 2 seconds and the hours will flash.
2. Use the START/STOP (UP) or SPLIT (DOWN) buttons to enter
the hours.
3. Press the MODE button to confirm.
4. Use the START/STOP (UP) or SPLIT (DOWN) buttons to enter
the minutes.
5. Press the MODE button to confirm.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RMW128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RMW128 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RMW128

Oregon Scientific RMW128 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info