589104
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
GB
To stop the alarm, press [ ] or [SNOOZE]. If [SNOOZE]
button is pressed, the alarm sound will be turned off temporarily
and the snooze function will be activated. The alarm will go off
again after approx. 8 minutes until other key is pressed to turn off
the alarm.
RESETTING THE UNIT
In case of malfunction or abnormal display, press the [RESET]
button at the bottom of the unit wth a blunt stylus. All settings will
be cleared and reset to their default values.
HOW TO USE THE GUIDING LIGHT
RM813P/ RM813PU is equipped with a guiding light. To test the
functionality of the guiding light or to turn it on temporarily, press
the [TEST] button with a blunt stylus at the bottom of the unit. The
light will be on as long as the button is pressed and held.
For continuous use of the guiding light, AC Power adapter is
required to be connected. For instructions on how to install the
adapter, please see Section “How to Use the Projector with Power
Adapter”.
Once the power adapter is in place, slide the [LIGHT ON] switch at
the side of the unit to the back to turn on the guiding light for a
longer time. To turn the light off, simply slide the switch to the
opposite direction.
Note that this switch can only be used when the power adapter is
installed. For test or momentary light-on, use the [TEST] instead.
HOW TO CHANGE
THE GUIDING LIGHT BULB
RM813P/ RM813PU is pre-installed with a 3V lightbulb. In case
you want to change the lightbulb follow the instructions below:
1. Un-install the power adapter from the unit to prevent electric
shock. Remove the batteries from the battery compartment as
well.
2. Remove the tail of the unit as shown.
3. Then, remove the lightbulb by rotating it in a anti-clockwise
direction.
4. Replace with new lightbulb with correct specifications. Make
sure the lightbulb is securely fixated.
5. Replace the tail of the unit as shown.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RM813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RM813 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RM813

Oregon Scientific RM813 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info