587152
21
Zoom out
Zoom in
Previous page
1/22
Next page
21
GB
SECTION 8 :
TECHNICAL SPECIFICATION
CALENDAR CLOCK
Time : 12hr with am/pm indication
or 24hr
Date : MM.DD or DD.MM
Year : 2001 – 2099 (auto-calendar)
Zone time : (+)23 – (-)23 hours
Chronometer : 99:59:59 (hr:min:sec)
Alarm : 1 min daily alarm
No memory records
and bar graph for the
sea level pressure.
(1) Battery has been
changed.
(2) The watch has been
reset.
(3) The sea level
pressure is inferior
to the lower limit of
the display range of
the bar graph.
(1-2) Leave the watch
for one hour till
the sea level
pressure starts to
update again.
(3) The display range
will be readjusted
for the next
updated.
Weather forecast
icon never changes.
The barometer changes
were covered by the
activities changes.
Reset the weather
forecast icon to match
with the current weather
in order to speed up the
response.
LAP memory is not
functioning in
TIMER 1.
(1) LAP memory is
full.
(2) Memory group
record is full.
Delete the memory
group(s) to release the
memory space for LAP
function.
TROUBLE POSSIBLE
CAUSE
REMEDY
The bar graph of the
sea level pressure
was kept at a high
level.
The sea level pressure
exceeds the upper limit
of the display range of
the bar graph.
The display range will
be readjusted for the
next update.
TROUBLE POSSIBLE
CAUSE
REMEDY
After changing the
unit of measurement,
the historical
readings of the sea
level memories were
shown constant.
The watch displays
default values because
there were no updated
data captured.
The sea level memories
will be resumed to the
memorized values once
the sea level pressure
has been updated.
Cannot start the
Timer in SAILING
TIMER mode.
TIMER 1, TIMER 2 or
TIMER 3 is running.
Stop the running timer
and reset the TIMER.
Start the desired
TIMER accordingly.
Temperature shown
is higher than the
actual temperature.
The thermometer
detected the body heat
instead of the actual
temperature.
Take the watch off the
wrist of leave it on
open area for at least
15 minutes.
No key function when
key pressed.
Key lock function has
been activated.
Release the key lock
function.
No back light when
EL back light key is
pressed.
Battery level is too low
to activate the backlight.
Replace the old battery
with a new one.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RA201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RA201 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RA201

Oregon Scientific RA201 User Manual - German - 24 pages

Oregon Scientific RA201 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info