589171
4
Zoom out
Zoom in
Previous page
1/9
Next page
EN
4
VFD DISPLAY
ACTIVATE / DEACTIVATE THE DISPLAY
Slide the VFD control switch at the back of the weather station to different display
options:
Display ON – The VFD display and the LED light bars will always be on.
Display OFF – The VFD display and the LED light bars will always be off.
Display AUTO – The VFD display and the LED light bars will be on when any
key is pressed or the SNOOZE / ACTIVATE touch panel is triggered. The
display and the light bars will be turned off after 30 minutes if no other keys
are pressed.
REMOTE SENSOR
This product is shipped with the RTGR328N Thermo / Hygro Sensor. The main
unit can collect data from up to 5 sensors (5 Thermo / Hygro Sensors). The
THGR328N and THGR228N sensors are also compatible with this weather
station. (Additional sensors are sold separately. Contact your local stockist for
more information).
The RTGR328N Sensor collects temperature and humidity readings, and signals
from official time-keeping organizations for the radio-controlled clock.
SET UP THERMO / HYGRO SENSOR (RTGR328N)
1. Open the battery compartment with a small Phillips screwdriver.
2. Insert batteries.
3. Set the channel and radio signal format. The switches are located in the
battery compartment.
4. Press RESET, then set the temperature unit.
5. Close the battery compartment.
To fold out the stand:
For best results:
Insert the batteries and select the unit, channel, and radio signal format
before you mount the sensor.
Place the sensor out of direct sunlight and moisture.
Do not place the sensor more than 30 metres (100 feet) from the main
(indoor) unit.
Position the sensor so that it faces the main (indoor) unit, minimizing
obstructions such as doors, walls, and furniture.
Place the sensor in a location with a clear view to the sky, away from metallic
or electronic objects.
Position the sensor close to the main unit during cold winter months as
below-freezing temperatures may affect battery performance and signal
transmission.
NOTE The transmission range may vary and is subject to the receiving range of
the main unit.
SWITCH OPTION
Channel If you are using more than one sensor, select a
different channel for each sensor.
Radio Signal Format EU (DCF) / UK (MSF)
SWITCH OPTION
Temp °C / °F
1
2
GETTING STARTED
INSTALLING THE WALL-MOUNT HOLDER
To install the wall-mount holder:
1. Use the diagram provided to mark where the 6 screws will be drilled.
2. Drill the screws into the wall to affix the wall-mount holder.
3. Put on the wall-mount cover.
4. Unscrew the bar that is in the Mirror Weather Station stand.
5. Attach the stand to the wall-mount holder and screw to affix firmly in place.
6. Adjust the angle of the mirror.
AC ADAPTOR (MAIN UNIT)
Please install the AC adaptor at the back of the unit as illustrated. (Hiding of the
adaptor wire can only happen when the wall-mount holder is installed).
1 2
3 4
5 6
MR238(EN)A4f 9/9/04, 12:11 PM4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific MR238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific MR238 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific MR238

Oregon Scientific MR238 User Manual - English, German - 58 pages

Oregon Scientific MR238 User Manual - German - 7 pages

Oregon Scientific MR238 User Manual - Dutch - 58 pages

Oregon Scientific MR238 User Manual - Dutch - 15 pages

Oregon Scientific MR238 User Manual - French - 58 pages

Oregon Scientific MR238 User Manual - French - 15 pages

Oregon Scientific MR238 User Manual - French - 7 pages

Oregon Scientific MR238 User Manual - Italian, Portuguese, Swedish, Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info