589394

Oregon Scientific BHM612A Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
2
GB
HOW TO ENABLE OR DISABLE AUTO-
RECEPTION
To disable the automatic signal reception feature and cause the
BHM-612A to operate as a quartz clock, hold down [ZONE] for
three seconds.
To enable the feature again, hold down the [UP] button for three
seconds. The RF signal display will start scanning to initiate
reception automatically.
HOW TO SET THE CALENDAR CLOCK
MANUALLY
When the current time is displayed:
• Press [ MODE / SET ] for two seconds. Hours digits will
flash.
• Set the hour using [ UP ].
• Press [ MODE / SET ]. Minutes digits will flash.
• Set the minutes using [ UP ].
• Press [ MODE / SET ].
• Follow the same pattern to enter year, month, day and the
display language for the weekday. You can choose among E
(English), F (French) and S (Spanish).
• Press [ MODE / SET ] to save the changes and exit.
If changes are made during the process, the seconds of the clock
will reset and start from zero. The unit will also save all changes
and return to normal display automatically after the unit has been
left idle for a minute.
HOW TO SET AND USE THE ALARM
To set the alarm time:
1. Press [ ALARM] to display the alarm time.
2. Press and hold [ ALARM ] for two seconds. Hours digits
will flash.
3. Set the hours using [ UP ].
4. Press [ALARM ]. Minutes digits will flash.
5. Set the minutes using [ UP ].
6. Press [ ALARM ] to save and exit. The alarm clock will be
activated automatically during the setting procedure.
To activate or deactivate the alarm during normal display.
• Press [ ALARM ] to display the alarm time.
• Press [ ALARM ] to change the status of the alarm. The
respective indicator will appear.
When the alarm goes off, the alarm sound will gradually increase
in volume and speed. The alarm will continue to sound for
approximately two minutes unless interrupted when any button
is pressed. If the alarm is not interrupted, after 2 minutes the
alarm will silence itself and reactivate after approximately eight
minutes.
Battery
Holder
Screw
DISPLAY MODES
In normal display, the current time, with seconds, will be
displayed in the main window and the date will be displayed in
the secondary window.
To display the weekday in the main window, press
[ MODE / SET ] once. Press the button again to display seconds.
To display the alarm time in the secondary window, press
[ ALARM ] once. Press [ MODE / SET ] to display the date.
ABOUT RECEPTION OF RADIO SIGNAL
The BHM-612A is designed to automatically synchronize its
current time and date when within range of the U.S. Atomic
Clock.
When the unit is within range, its radio-control mechanism will
override all manual settings. The benefit of a RF controlled
clock is sustained accuracy without the need of manual adjustment.
Complete signal reception generally takes about 2 to 10 minutes,
depending on the strength of the radio signal. When the reception
is completed, the signal display will be stable. After that, the
periodical scanning will only take a few seconds.
For better reception of radio signals, place the clock away from
metal objects and electrical appliances to minimize interference.
SIgnal Search Mode.
Signal Reception Mode
No Signal Received
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BHM612A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BHM612A in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info