EN
10
BAROMETER
This product tracks barometric pressure changes over
the past 24 hours to provide the weather forecast
and a trend line showing the direction of barometric
change. Barometric changes are measured by the
main (indoor) unit.
BAROMETRIC TREND
TREND DESCRIPTION
Rising
Steady
Falling
SET UNIT AND ALTITUDE
You can set the unit of measurement (mb or inHg) and
altitude. Doing this allows the product to take more
accurate barometric measurements.
1. Press PRESSURE to select the unit of
measurement: mb or inHg.
2. Press and hold
PRESSURE for 2 seconds.
3. Select the altitude (-328 feet to 8203 feet in
increments of approximately 33). Press
or
to change the setting. Press PRESSURE to
confirm.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of
weather within a 30 to 50 mile (19 - 31 km) radius with
70 to 75 percent accuracy. The weather forecast is
always displayed.
CLEAR PA R T LY
CLOUDY
CLOUDY RAINY
TEMPERATURE, HUMIDITY AND HEAT INDEX
This product can display current, minimum, and
maximum temperature, humidity percentage and heat
index information collected by the remote sensors and
main (indoor) unit.
Outdoor data is collected and displayed every 40
seconds. Indoor data is collected and displayed every
10 seconds.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The
switch is located on the front button panel. The setting
for the main unit overrides the Thermo-Hygro sensor
setting.
