520301
6
Zoom out
Zoom in
Previous page
1/7
Next page
6
GB
the current 10 seconds are on the column on the far right. Each
column to its left means 10 previous seconds.
HOW TO ADJUST SENSITIVITY LEVEL
The sensitivity level affects how the unit rates the air quality. You
may have to adjust the sensitivity according to the actual
environment of the installation or specific needs.
To adjust the sensitivity level,
1. Press [
]. The [ ] indicator will blink.
2. Use [ ] or [ ] to select the desired level.
3. Press [
] to exit. The unit will also return to normal display
after 10 seconds.
Note that the new sensitivity level only applies to future samplings
but not the old ones in memory.
BAD AIR WARNING
When the air quality is considered bad, the [ ] indicator will
appear to show the room needs immediate ventilation. These indicators
will remain lit until the air quality improves.
If the ALARM ON/OFF switch is set on ON, an alarm will also go
off continuously for 10 seconds. If the air quality does not improve,
a beep will be emitted every minute for the next 7 minutes and every
10 minutes afterward. To stop the alarm, press any button. To disable
the feature, set the switch to OFF.
TEMPERATURE AND HUMIDITY
The current temperature and humidity are displayed at all times.
To show the maximum or minimum readings in memory, press [
]
or [ ], respectively. Press the button again to go back to the
current readings. The unit will also do so automatically after 5
seonds.
To clear the memory,press and hold “ C ” button for two seconds.
°C/°F SWITCH
The temperature unit is selected on the °C/°F switch. Slide the switch to
°C for degree Centigrade or °F for degree Fahrenheit. The selected unit
will apply to the current temperature as well as temperatures in memory.
HOW TO USE THE BACKLIGHT
Press [ ] to turn on the backlight for five seconds.
THE RESET BUTTON
This button is used only when the unit is operating in an
unfavorable way. Use a blunt stylus to hold down the button. All
memories will be erased.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific AR112N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific AR112N in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific AR112N

Oregon Scientific AR112N User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info