Manual Oregon Scientific AP 928 - WMR928NX (page 21 of 23) (English)

520285

Zoom out

Zoom in

1/23

PROBLEM SOLUTION

derivative of a parameter, and then filtering it over one hour. Thus, the

rate of change equation factors all of the measurements taken in the last

hour, and may not exactly match the change in one hour. Determining the

actual change in one hour would require every measurement within the

hour to be saved, which is not practical, and would require the software to

be operational for more than one hour. Instead, Virtual Weather Station

uses calculation techniques standard in the engineering community for

calculating rate of change.

Virtual Weather Station's rain rate may not agree with the rain rate

calculated by the weather station because different techniques are used.

How do I display more decimal

points for a parameter?

Change the precision from the display's attributes panel. For example,

changing the precision to three will add three numbers to the right of the

decimal point (1/1000ths).

The jpeg images are distorted Power save mode must be turned off to prevent distorted images

Weather display image colours are

poor quality

Virtual Weather Station prefers to run at High Colour or 16 bit. Select

StartXSettingsXControl Panel from the windows menu bar and select

[Display][Settings] and High Colour.

The software is consuming too

much CPU resources

• Select Program SettingsXProgram Settings and set the CPU

resources to Low.

• Select InternetXFTP General Settings and set the FTP Priority to

Below Normal and select the Max CPU During FTP to OFF.

• Select Communication][Communiaction], and set the Communication

Rate (sec) to 3.0 seconds or greater.

The graphical images are missing You may be low on memory. Reduce the number of graphical images

displayed.

The computer is low on memory Reduce the number of displays. Too many displays may result in

insufficient memory.

The graphs update slow or the

program locks up when displays are

updated

Reduce the length of time in your graphs. Select Plot Last x hours. Enter a

number less than 240 hours (for example). Plotting 20,000 points on

multiple graphs can cause long delays.

The font size is incorrect after

changing the font type

Changing font type can also change the font size due to font size

limitations. To restore default fonts, select the Default button from the font

settings window and restart the program.

The Moonrise (or Moonset) is

showing --- instead of the time

Approximately once a month, the moon does not rise (or set) on a given

day.

There is no data in my graph or

distribution chart when the program

is started.

The chart will be empty if (1) the database is empty (example, when the

program is first started, or (2) Data has not been collected in the plot time

frame specified in the attributes window (the program was turned off).

The data in my graph is wrong.

How can I fix it?

This problem is generally a result of bad sensor data from your station, but

can be repaired in your database.

The data shown in graphs is stored in the database. To fix this data, go to

SettingsXDatabase Settings and edit the database.

The data in my NOAA reports is

wrong. How can I fix it?

This problem is generally a result of bad sensor data from your station, but

can be repaired in your archive memory. The data shown in the NOAA

reports is stored in the archive memory.

To fix this data, go to SettingsXDaily Archive, SettingsXMonthly

Archive or SettingsXYearly Archive and edit the data.

The data looks overwritten when

opened from the file folder in Virtual

Weather Station

Virtual Weather Station launches Notepad to view text files. This is a

problem with Notepad. Use another text editor such as Microsoft Word or

Wordpad to view the data.

The display image colours are poor

quality

Virtual Weather Station prefers high resolution or 16-bit colour. Some

images may result in poor quality at lower resolution settings.

The numerical markers on the

ribbon and temperature displays are

not evenly spaced

The software attempts to put a numerical marker at even increments, but

this is not always possible. To improve your numerical marker increments,

select a high and low range value that results in a difference of a multiple

of 10. For example, a low of -40 and a high of 60 will provide a difference

of 100. This will produce better marker increments then a low of -20 and a

high of 100.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific AP 928 - WMR928NX in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific AP 928 - WMR928NX

Oregon Scientific AP 928 - WMR928NX User Manual - German - 26 pages

Oregon Scientific AP 928 - WMR928NX User Manual - Dutch - 29 pages

Oregon Scientific AP 928 - WMR928NX User Manual - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific AP 928 - WMR928NX Manual

Product: