– P8 proportional with 0.8°C band (-0.3 ÷ +0.5°C) and period 8 minutes
– P15 proportional with 1.5°C band (-0.7 ÷ +0.8°C) and period 15 minutes
• Measurement precision: ± 0.5 °C
• Measurement temperature resolution: 0.1 °C
• Settable setpoint range: 2°C ÷ +35°C
• Operating temperature: 0 °C ÷ +50 °C
• Storage temperature: -10 °C ÷ +65 °C
• Operating humidity: 20÷90% non-condensing
• Degree of protection: IP40
• Insulation: reinforced among accessible parts (frontal) and all other terminals
During the standard operation the thermostat displays the detected temperature value and the relay status is identified by the symbol
(heating) or(cooling).
REFERENCE STANDARDS
Compliance with Community Directives:
2006/95/EC (Low voltage)
2004/108/EC (E.M.C.)
is declared in reference to the harmonized standard:
• EN 60730-2-9
Minimum settable setpoint - L0
It’s the minimum value settable as setpoint.
Settable values: 2 ÷ 35°C
Maximum settable setpoint - KI
It’s the maximum value settable as setpoint.
Settable values: L0 ÷ 35°C
Operating mode - E-I
if connected to the boiler (heating)
if connected to a cooling system
• Thalos series thermostats are designed for wall mounting installation. Alternatively, they can be installed to cover the three-module in built box.
• Install the thermostat at a height of about 1.5 m above the floor, away from direct sunlight, away from doors, windows, heat sources, locations with excess or total lack of
ventilation.
Connect the wires to the terminal block
on back of the base, as shown in the
“wiring diagrams”.
Fix the base on the wall using the
screws supplied.
Insert the batteries into the battery
compartment on the back of the
thermostat, respecting the indicated
polarity.
Attach the thermostat to the base, at
first mating teeth on the higher side.
1
1
2
To enter menu Advanced programming keep simultaneously pressed for 5
seconds the keys
and until PR will appear.
The items of the menu are displayed in succession. For each item is
displayed an identity breviation and its relative blinking value. Use the
keys
and to modify the blinking value. After 3 seconds without
touching the keys there is the passage to the following parameter. The
writing END will appear when all parameters are set and the thermostat
returns successively in standard mode saving the effected modifications.
Thalos has got an input to whom to connect an external contact (see wiring diagrams).
With closed contact, the setpoint is reduced by 3 °C than the set one.
The display backlighting is normally OFF and it is enabled (blue color) entering
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Orbis THALOS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Orbis THALOS in the language / languages: English, German, Spanish as an attachment in your email.
The manual is 1,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.