Manual Orbis Mirus (page 6 of 10) (English, German, French, Italian, Spanish)

612916

Zoom out

Zoom in

1/10

CHRONOGRAMS

MANUAL OPERATION (THERMOSTAT)

With the apparatus in normal mode, press the

button and the timer-thermostat

will operate as a normal thermostat, without any time programming, only taking into

account the temperature. The desired temperature is selected simply by pressing

the

or button until it is displayed. The unit will commence operating as a

thermostat ten seconds after the final temperature modification and display the

ambient temperature and the word MANUAL on the screen.

To return to the timer-thermostat mode, press the

button again.

TEMPORARY MANUAL MODE

This mode is used to manually modify the temperatures corresponding to the

consecutive time periods with the same control temperature. When the programme

changes the control temperature type, it will return to the established programme.

To select this when in START mode, press the

or button and the current

time period control temperature will be displayed. If the

or button is pressed

again, the control temperature for the consecutive time periods will be modified,

with the unit entering TEMPORARY MANUAL.

The control temperature symbols will disappear from the display while the

TEMPORARY MANUAL mode is activated and the word MANUAL will appear

flashing.

To exit this mode before completion, turn the programming wheel from START to

any other mode and it will return to START, or the

button can be pressed twice.

Example:

The programmed control temperature is to be temporarily modified to 22ºC, with

the MIRUS programmed with the following parameters:

• Control temperatures: Savings (

) at 17ºC and Comfort ( ) at 20ºC.

• On Tuesday at 18:24.

• With the following programme for this day:

- Savings : 00:00 to 09:00, 13:30 to 20:00 and 22:30 to 00:00h.

- Comfort

: De 09:00h a 13:30h y de 20:00h a 22:30.

This is achieved in START mode by pressing the

or button so that the

control temperature is displayed for the current time period. the

or button is

pressed again to change the temperature value to 22 ºC.

From this moment, the MIRUS will regulate heating On/Off until 22ºC is reached,

during the time that the control temperature is consecutively programmed (the one

just modified) until 20:00 when the control temperature mode is changed in the

programming to Comfort (

Before applying the TEMPORARY MANUAL mode, the display will show the

configured chronogram:

When the TEMPORARY MANUAL mode is activated the display will show the

following:

OFF OPERATION

If the equipment is switched On, pressing the

button will switch it Off, the

heating will not be switched On, the temperatures cannot be modified and the

screen will be OFF. This mode, the unit measures the ambient temperature, but will

not perform any of its functions, except if the temperature falls below +5ºC, at

which point it will activate the de-icing programme and will switch the heating On to

prevent freezing.

This mode is exited by pressing the

button again.

RESET

The RESET is pressed in order to reset the timer-thermostat. Then all the

parameters have to be reprogrammed. In any case, the last weekly programme

entered prior to the reset will remain in memory.

TECHNICAL SPECIFICATIONS

Power supply: Two LR6/AA, 1. Alkaline batteries (not

included)

Switching power: µ 10 (3) A 250 Vac

Contact: AgNi switched, 90/10

Battery duration: Approximately one year

Temperature measurement precision: ± 0.5°C

Temperature update: Every 60 seconds.

Resolution: 0.1°C.

LCD measurement range:: 0ºC to 50ºC

Action type: 1B, 1S, 1T and 1U

Number of programmes: 7 (one for each day of the week)

Minimum programmable times: 30-minute periods

Operational precision: ≤ ±1.2 sec/24 h at 23ºC

Output relay update: Every 60 seconds

Control temperature regulation: Savings

: +5ºC to +25ºC

Comfort

: +15ºC to +35ºC

Anti-freezing: 5ºC

Manual: +5ºC to +35ºC

Regulation type: ON-OFF with 0.3ºC hysteresis

Operating temperature: 0ºC to +50ºC

Transport and storage temperature: -10ºC to +60ºC

Protection class: II according to EN 60335 with correct

installation

Protection type: IP40 according to EN 60529 with

correct installation

Contamination situation: Normal

Transient pulse voltage: 2.5 kV

Ball test temperature: 75ºC (21.2.5); 105ºC (21.2.6)

Connection Screw terminals for wires having a

maximum 2.5 mm² section

 WARNING: Contactors must be employed if the maximum load current

exceeds the switching current.

DIMENSIONS

02.01/2012 A016.32.56113

1 2 3 4 5 6 7

Boiler operation

indicator

Day of the

week

Current time

mbient

temperature

Chronogram.

Indication of

temperatures

Programmed in

time periods

Manual operation

indicator

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.

Lérida, 61 E–28020 MADRID

Telephone:+ 34 91 5672277; Fax:+34 91 5714006

E-mail: info@ orbis.es

http://www.orbis.es

30 138

Start

PROG

No control

temperature symbol

Temporary manual

operation indicator

(flashing)

1 2 3 4 5 6 7

Control temperature symbol for the

current time (flashing)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Orbis Mirus in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Orbis Mirus Manual

Product: