612919
2
Zoom out
Zoom in
Previous page
1/2
Next page
FLUSH MOUNTING DIGITAL TIME SWITCH
DECO DATA
INSTRUCTIONS FOR USE
INSTALLATION
This device is designed for installing in a universal flush mounting box or surface
mounting box. Follow the next diagram:
RECOMMENDATIONS
The installation should be carried out by an officially authorised technician.
Do not install near inductive charges (motors, transformers…).
A separate power supply line is advisable (if necessary from a network filter).
RESET
When resetting, the device will restore the last valid settings before the power
supply was lost: time and date, programmes P1 to P20 and configuration of
parameters.
Regardless of the length of time the device is disconnected, the programmed
alarms and configuration parameters will be saved correctly.
The time and date will be saved for a period of approximately 24 hours, without any
type of power supply.
Following a period longer than this, the device will reset to 1 January 2006, 00:00
hours.
The device is reset by pressing the 4 buttons simultaneously.
After resetting the device the factory default settings are the following:
Language: Spanish
Time: 00:00 (24 hour mode)
Date: 01/01/2006 – Sunday (winter)
Daylight saving adjustment in spring: last Sunday in March at 2am
Daylight saving adjustment in autumn: Last Sunday in October at 3am
All programmes empty.
DEVICE FUNCTION
The device is programmed using the menus and sub-menus.
The values to be programmed will flash on the display.
The following information is displayed on the screen:
- Day of the week.
- Time and date.
- Schedule of settings established for that day.
- Status On/Off
- Hand symbol (if activated).
- “PERMANENT” will be displayed on the second line if it is activated.
C: Return to the previous option / switch between statuses:
- PERMANENT: the programmes will not be carried out.
- PROGRAMMED the device works normally and displays the schedule
assigned for the current day.
▲▼: Both buttons have the same function. They manually switch the activation
status of the channel: On/Off.
: Access the menu / Confirm the flashing value.
▲: Scroll up the menu / Increase the flashing value. If it is held down the value can
be increased faster, by 5 units per second
▼: Scroll down the menu / Decrease the flashing value. If it is held down the value
can be decreased faster, by 5 units per second.
PROGRAMMING OF SETTINGS
The device’s 20 programmes can be set using this menu.
Each one can be seen by pressing the buttons ▲▼.
To access a specific programme simply press button
.
The type of setting can be programmed:
- On, Off
- Start Random: the random period starts.
- End Random: the random period ends.
The random periods (for presence simulation) carry out a change in the relay
activation status for periods between 30 minutes and 2 hours, from the start of the
period or as of the last relay switch.
Note: programming of any On/Off, manual switch or date/hour change carried out
whilst the random period is activated will cause the random period to end
immediately.
TIME ADJUSTMENT
The device’s time can be set using this menu. The values to be configured include
(in this order): Year, month, day, day of the week, hour, minute.
Once MINUTE has been confirmed the display will automatically return to MAIN
MENU and the time and date will be saved.
LANGUAGE SELECTION
The language can be set using this menu, selecting between:
Spanish, English or Portuguese.
ADJUSTMENTS MENU
This menu accesses the more complex functions of the device, such as:
configuration of daylight saving changes, type of load, switch off mode and
programme deleting mode.
- SEASON sub-menu: In this menu the daylight savings changes can be set,
selecting between:
- Automatic: switches to daylight saving at 2am on the last Sunday in
March and switches back at 3am on the last Sunday in October.
- Manual: this allows the specific dates and times of the changes to be
established.
- Disabled: daylight saving changes will not be made.
- STATUS sub-menu: Programmes can be switched off for a certain period of time
using this menu, without the need to delete the settings. The following options are
available:
- OFF: the device remains switched off (everything works except the
programmes). The relay remains Off.
- RANDOM: the device will only work with the random programmes. The
other programmes are ignored.
- NUM DAYS: the timer programme will NOT function during the number of
programmed days between 1 and 31, (for example: holiday period).
- ON: Any type of programme will function.
- DELETE sub-menu
All the programmes can be deleted.
- VERSION sub-menu
The firmware version of the device can be displayed quickly in this menu. Type:
INT V1.00.
TECHNICAL CHARACTERISTICS
Power supply: 230 V~
Power supply tolerance: ± 10%
Frequency: 50 Hz.
Rupture capacity: µ 8 (2) A / 250 V ac
Internal consumption: 16.5 VA Maximum capacitives (1.4 W).
Temperature: From 0 ºC to +40 ºC
Recommended maximum loads:
Incandescent: 1,800 W
Non-compact fluorescent: 500 W
Compact fluorescent: 250 W
Low voltage halogens: 600 VA
Halogens (230 Vac): 1,500 W
Energy saving lights: 140 W
Precision: ≤ ± 1 s/24 h at 23 ºC using quartz crystal
Type of protection: IP 20 according to EN 60529
Class of protection: II according to EN 60335 fully installed
Directives: 2002/95/EC (RoHS) 73/23/CEE and
93/68/CEE (Electrical Safety)
89/336/CEE and 92/31/CEE (CEM)
Mark: EC
DIMENSIONS
A016.35.53585
ORBIS TECNOLOGIA ELECTRICA, S.A.
Lérida, 61 E-28020 MADRID
Teléfono: +34 91 5672277; Fax: +34 91 5714006
E-mail: info@ orbis.es
http://www.orbis.es
93
86
31
45.5
60
60
2 1 4 L N
L
N
Frame
Metallic frame
Button for returning
to previous option
Function selection
buttons
Menu access button /
Confirm flashing value
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orbis DECO DATA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orbis DECO DATA in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info