612935
4
Zoom out
Zoom in
Previous page
1/4
Next page
TECHNICAL FEATURES
- Nominal voltage: See rating plate
- Frequency: 45-60 Hz
- Breaking power: 16A – 4A X 250 V ~
- Own consumption: 5 VA
- Fuse: 100 mA
Protected against power supply cuts of up to 10 min (after 1 hour of connection at
least)
- Precision: ±0.2%
- Temperature range:
Operating conditions ......................-10°C to +45°C
Operating limit conditions.................-20°C to +55°C
Storage conditions............................-25°C to +70°C
- Casing protection: IP 20 to UNE 20-324
- Immunity to rapid electrical transitories: Level 3 to IEC 801-4
- Resistance to ray type pulses: 6 kv 12/50 μs to UNE 20.324
- Maximum number of coins or tokens: 99
- Timing by coin or token
- Maximum: 150 hours/coin
- Minimum: 1 minute/coin
- Coin types. Only one of the following types: 0,50€, 1€ and 2€.
DIMENSIONS:
"CTM ELECTRÓNICO" PROGRAMMING EXAMPLES
Example 1: We wish an installation to operate with a minimum of 2 coins for which we
wish there to be a total timing of 1 hour, i.e.
1 coin = 0
2 coins = 1 hour
3 coins = 1 hour 30 minutes
4 coins = 2 hours
5 coins = 2 hours 30 minutes
For this we will have to configure the CTM ELECTRÓNICO in the following way:
- Turn SW1 until it indicates the number 2. In this way we define that timing
does not start until the second coin is inserted.
- Set SW2 switches 1, 2 and 5 to OFF and switches 3 and 4 to ON (normal
timing = 30 minutes/coin).
- Turn SW4 until it indicates the number 0. In this way we deactivate
special timing.
- Press the RESET button (SW7) to validate the programme.
Example 2: We wish to regulate the use of an installation in such a way that each coin
has a timing time of 1 hour but each coin after the fourth coin has a timing time of 3
hours, i.e.
1 coin = 1 hour
2 coins = 2 hours
3 coins = 3 hours
4 coins = 12 hours
5 coins = 15 hours
6 coins = 18 hours
Furthermore, we wish the early warning to be activated 30 seconds before the end of
the metered time. For this we will have to configure the CTM ELECTRÓNICO in the
following way:
- Turn SW1 until it indicates the number 1. In this way we define that timing
will start when the user inserts the first coin.
- Set SW2 switches 1, 2, 3 and 4 to OFF and switch 5 to ON (normal
timing = 1 hour/coin).
- Turn SW4 until it indicates the number 4 (special timing after the fourth
coin).
- Set SW3 switches 1, 3 and 4 to OFF and switches 2 and 5 to ON (special
timing = 3 hours/coin). - Set SW3 switch 6 to OFF (short early warning).
- Press the RESET button (SW7) to validate the programme.
Example 3: We wish an installation to operate with a minimum of three coins for which
we wish there to be a total timing of 1 hour, i.e.
1 coin = 0
2 coins = 0
3 coins = 1 hour
4 coins = 1 hour 20 minutes
5 coins = 1 hour 40 minutes
6 coins = 2 hours
Furthermore, we wish the early warning to be activated 4 minutes before the end of the
metered time. For this configuration we will have to:
- Turn SW1 until it indicates the number 3. In this way we define that timing
does not start until the third coin is inserted.
- Set SW2 switches 3 and 5 to OFF and switches 1, 2 and 4 to ON (normal
timing = 20 minutes/coin).
- Turn SW4 until it indicates the number 0. In this way we deactivate
special timing.
- Set SW3 switch 6 to ON (long early warning)
- Press the RESET button (SW7) to validate the programme.
A016.12.49199
255
172
119
ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61 E–28020 MADRID
Teléfono:+ 34 91 5672277; Fax:+34 91 5714006
E-mail: info@ orbis.es
http://www.orbis.es
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orbis CTME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orbis CTME in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info