612900

Orbis Athena Manual

64
Zoom out
Zoom in
Previous page
1/96
Next page
- 62 -
Instruction Manual Athena
English
TELEPHONE CONTROL
• The chronothermostat can be operated via a telephone combiner voltage-free contact,
with a resistance of < 100
).
• There are two operating modes:
°
open contact; normal operation;
°
closed contact; the zones enter the OFF state until the successive opening of the
contact, entering the state existing prior to closing the contact.
• When the symbol
is displayed on the main page, it means that the telephone
contact is closed (OFF state).
NETWORK CONFIGURATION
• By default, the Athena chronothermostat is only confi gured for zone 1, confi guring
the internal sensor as sensor and the unit relay as actuator.
• The network has to be confi gured to use the remote wireless actuators or over the
bus, or remote sensors over the bus.
• To accomplish this, the remote sensor and/or remote actuator is selected for the
desired zone from the “Confi guration of each adjustment zone” menu, then prior to
pressing the [OK] key, to start up the confi guration procedure, the remote sensor and/
or actuator is confi gured (see the associated instructions).
• After pressing the [OK] key the unit will use the “OK” message to indicate that the
zone confi guration has been correctly confi gured.
ERROR MESSAGES
• Poor operating conditions may occur during normal operation that prevent normal
operation.
• For example, if an internal, external or remote sensor develops a fault, the temperature
fi eld of the corresponding sensor will display [--.-], disable the adjustment for this
zone and force the associated actuator to go to the OFF state.
• If any bus peripheral communications errors occur, the following message will be
displayed onscreen: “PERIPHERAL ERRORS ON BUS Z …”.
• The zones will have to be tested in order to identify the problem (see the note in the
confi guration menu for each of the adjustment zones).
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orbis Athena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orbis Athena in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info