Manual Orbis Athena (page 60 of 96) (English, Italian, Portuguese, Spanish)

612900

Zoom out

Zoom in

1/96

- 58 -

Instruction Manual Athena

English

• When a change takes place in the operation set mode, the adjustment will occur

in ON/OFF mode until Tset is reached the ﬁ rst time, to thus achieve the conﬁ gured

conditions as quickly as possible.

IMPORTANT: the PROPORTION conﬁ guration will not have any effect if operation

is SUMMER type; in this case, the adjustment mode will always be the ON/OFF

type.

ADVANCED PROGRAMMING

• TThe operating parameters common to all adjustment zones are conﬁ gured in this

menu, designated by the symbol

conﬁ guration of each adjustment zone;

existence of external sensor;

ºC/ºF measurement unit;

unit bus address.

Conﬁ guration of each adjustment zone

• On accessing the menu, the ﬁ rst zone Z1conﬁ guration

screen will be shown.

• Use the key

to sequentially display the other zones.

• The following conﬁ guration parameters can be entered:

the temperature sensor associated with the zone

may be:

internal (INT)

external (EXT)

remote over the bus (BUS)

the actuator associated with the zone can be:

relay (REL)

wireless (RF)

remote over the bus (BUS)

a description that identiﬁ es the zone name.

Note: a Tx.Athena radio module is required to program the remote via the bus

and the chronothermostat must be installed on the wall bracket.

• If the sensor chosen for the adjustment zone is an Athena.Temp Temp sensor, it

will be conﬁ gured in this phase.

• If the sensor chosen for the adjustment zone is an RX4-8A remote actuator, it will

be conﬁ gured in this phase (both wireless and via the bus).

ADV

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Orbis Athena in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Orbis Athena Manual

Product: