612900
52
Zoom out
Zoom in
Previous page
1/96
Next page
- 50 -
Instruction Manual Athena
English
Using the and keys from the main page, additional information can be displayed
for the current zone. Pressing the key
in fi eld 14 (see Figure 1), will display the
current zone name (if is confi gured, otherwise the “zone ... “ message is displayed).
Pressing eld 14 again will display the temperature measured by the external
sensor (if it exists and has been previously confi gured).
Pressing
eld 5 again will display the minimum and maximum temperatures
measured by the external sensor. Maintain this key
pressed for at least three
seconds to set the values to zero.
One more press of the key
will re-establish the main page.
The
and
arrows are used to display the daily program and the temperature of
the other zones.
Note: any zones that have been incorrectly confi gured will not be shown (see
the chapter Advanced programming”).
MANUAL OPERATION
This function is enabled/disabled by pressing the key
In manual operation, the screen will display the symbol
and the chronothermostat will operate as a normal
thermostat, displaying its setpoint in fi eld 14.
The setpoint value is adjusted using the
and
keys. The setpoint value can vary between 2.0º and
35.0º, with the default value at 18.0º in winter operating
mode and 23.0º in summer operation.
NOTE: the four zones can each be put into manual
mode, with different setpoint values.
EXTENSION PROGRAM
The extension program allows changing to manual operation for a defi ned
programmable time (up to 96 hours).
The chronothermostat will return to automatic operation at the end of this time.
The key
must be maintained pressed for at least three seconds to enable the
extension program. The symbol
, “extension” message and the time (fl ashing will
be displayed on screen).
Confi gure the time with the
and arrows and confi rm with the [OK] key.
The setpoint value may be modifi ed during the extension program in a similar fashion
as manul operation.
NOTES: the extension program can be deleted by confi guring the time to 00:00.
The extension program cannot be enabled once the countdown program has
commenced.
ESC
ESC
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orbis Athena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orbis Athena in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info