492713
4
Zoom out
Zoom in
Previous page
1/7
Next page
4
2
PUSH
1
1. Remove protection cap and insert
the plug. (
1
)
2. Connect the charger. (
2
~
3
)
3. During charging the LED indicator
lights red. (
4
)
Projector will not charge while
operating.
4.
The LED Charge Indicator will turn
green when battery is fully charged.
This process may take up to3 hours
4
CHARGING THE BATTERY
3
1
2
3
CONNECT VGA/COMPONET SOURCE - (VIDEO IN)
1
2
1
2
or
or
or
1. Connect the AV input source.
(
1
~
2
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
3. Connect earphones or amplified
external speakers to the audio out
connector of the projector (
3
)
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
2. The connecting cable of video output
device is not supplied, please contact their
service center.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
CONNECT VGA/COMPONET SOURCE -
(VGA/USB/HDMI/C
OMPONENT
IN
)
1
2
MOLEX
1
2
<Note>
1. For more LED indicator, see page 7.
2. Before using the first time, charge until
battery indicator turns green.
3. After the projector is turned off, the battery
may not start charging right away due to the
high temperature emitted by the projector.
CONNECT VGA/COMPONET SOURCE DATA TRANSFER
<Note> The laptop/PC can only detect the
input source when the Projector is switched on.
The projection will stop when this connection is
made.
1
2
1
2
or
CONNECT INPUT SOURCE
1. Connect the VGA/Component
source device with the Universal I/O
connector.
Insert universal connector with
arrow mark facing up.
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
1. Connect laptop or PC for data
transfer to the Projector internal
memory or additional MicroSD
memory using the supplied Male
USB Cable. When connected,
switch the Projector on.
1
2
CONNECT HDMI SOURCE
1. Connect the HDMI source device
to the mini HDMI conne connector.
(
1
~
2
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
CONNECT USB SOURCE
1. Connect the USB flash drive to the
micro USB port using the female
USB cable. (
1
~
2
)
2. Select
USB Flash Drive from
the Main Menu.
INSERT MICROSD CARD
1. Insert a MicroSD card into the
slot with the gold contacts facing
down.
2. Select
MicroSD Card from
the Main Menu.
<Note> MicroSD card is optional.
or
or
<Note>
1. USB device: Support USB Flash Drive
up to 5V/150mA, but does not support USB
Hard Disk Drive
2. Female USB cable, Component cable,
and HDMI cable are optional accessories.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma PK301plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma PK301plus in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma PK301plus

Optoma PK301plus User Manual - Spanish - 7 pages

Optoma PK301plus Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info