475897
18
Zoom out
Zoom in
Previous page
1/19
Next page
1818
If you experience a problem with your
projector, please refer to the following
information. If a problem persists, please
contact your local retailer or service
center.
Image Problems
No image appears on-screen
Ensure the cables/charger/
battery are correctly and securely
connected.
Ensure the pins of connectors are
not crooked or broken.
Make sure the projector is
switched on.
Image is out of focus
Adjust the Focus Dial.
Make sure the projection screen
is between the required distance
9.6 to 126.6 inches (0.245 to 3.215
meters) from the projector. See
page 5.
Image is too small or too large
Move the projector closer to or
further from the screen.
Image is reversed
Select “Setup --> Display -->
Projection” from the OSD and set
the projection direction.
Audio Problems
No sound
During video or music playback,
press the button.
Battery Problems
Battery capacity is low
Remove the battery and clean the
connectors.
The battery is worn out and needs
to be replaced.
The battery may not charge
correctly after the projector
is turned off due to the high
temperature emitted by the
projector. Let the projector cool
for a while before connecting the
charger.
LED Indicator
LED Color
Description
No light In operation
Amber Battery charging
Green
Charge complete
Transferring data
Red Battery low
Red (ashing)
Overheat; The projector
temperature exceeds 80°C.
tr o u B l e S h o o t I n gco m p a t I B l e vI D e o / vga mo D e
Timing Table
Mode Resolution V-Sync (Hz)
VGA
640x480 60
800x600 60
1024x768 60
1280x768 60
Video In
480i / 480P 60
576i / 576P 50
720P 50 / 60
1080i 50 / 60
<Note>
Video format does not support content with
B-Frame function.
Copyright © Optoma Company Limited.
All rights reserved.
Optoma reserves the right to make
technical changes. Optoma assumes
no liability for damages incurred directly
or indirectly from errors, omissions, or
discrepancies between the device and
this documentation.
<Note>
The LED ashes red when the projector
temperature reaches 80°C. It is
recommended to switch off the projector
to allow it to cool down.
When the projector temperature reaches
85°C, the projector automatically shuts
down due to the built-in temperature
protection. This is not a malfunction. Let
the projector cool down before switching
it on again.
Clause for Ofce / Document Viewer
The End User may not:
make copies of the Picsel Products or
make them available for use by third
parties.
reverse engineer, disassemble, reverse
translate, or in any way decode the
Picsel Products or any copy or part of
it in order to derive any source code.
Save only as is permitted by any
applicable law.
Other brands or logos are trademarks or
registered trademarks of their respective
companies.
This device is not intended for use in
the direct eld of view at visual display
workplaces.
ap p e n D I x co p y r I g h t / tr a D e m a r k
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma Pico PK120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma Pico PK120 in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma Pico PK120

Optoma Pico PK120 Quick start guide - English - 2 pages

Optoma Pico PK120 User Manual - German - 19 pages

Optoma Pico PK120 User Manual - French - 19 pages

Optoma Pico PK120 User Manual - Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info