424492

Opentel osd 3000 ci Manual

13
Zoom out
Zoom in
Previous page
1/15
Next page
Free To Air / Common Interface Digital Satellite Receiver
TROUBLE SHOOTING
23
Free To Air / Common Interface Digital Satellite Receiver
MENU OPERATION
22
7. TROUBLE SHOOTING
Problem
Does not display LED on the
front panel or the receiver has no power.
No pictures on the screen
No sound
Remote Control does not operate
Poor picture quality
Searching Signal
Unrecognized smartcard
Please insert your smartcard
Solution
- Connect the power cord to the power outlet
properly.
- Check if the receiver is in standby mode.
- Check if the video output port is firmly
connected to the Tv.
- Check if you have selected the correct
channel or video output on your TV.
- Connect the audio cords properly.
- Check the volume level of the TV.
- Press MUTEkey.
- Point remote control directly towards the
receiver.
- Check and replace batteries.
- Check the signal strength in the Automatic
Channel Searchmenu
- If this is low, try adjusting the alignment of
your dish.
- Connect the antenna cable properly.
- Check the LNB. Please replace LNB if
necessary.
- Check the position of the dish. Please realign
dish if necessary.
- Check the signal strength in the Automatic
Channel Searchmenu.
- Check the smartcard.
- Insert the smartcard.
About the Receiver
On - Screen Error Messages
7. CHANNEL GUIDE
Press GUIDEkey, and the following screen will be displayed.It will give the titles of the current
and next programmes on different channels.
The information may include : current time / channel
name, name of the current and next programme, the
start and total time of the current programme, the start
and total time of the next programme.
Programme information will be available only when it is
included in the transmission.
When you press the
♬key, you can alternatively
select TV or radio channel guide.
Press the menukey or exitkey to return to previous
menu.
8. AUDIO
Press AUDIOkey.
Select the audio mode which you want using the left / rightkeys

Some programs are broadcasted with one or more alternative language soundtracks.
You can select the preferred audio language for soundtrack using the up/downkeys

To watch a specific channel, first select it by pressing the up / downkeys and the page
up / downkeys ( , ). Then, press OKkey. This enables you to move into that specific
channel.
You can also select a specific satellite using the SATkey. When you press the
♬key, you can
alternatively select TV or radio channel list. When you press F1key
you can see all channel list or FTA channel or favorite channel list.
Press the menukey or exitkey to return to previous menu.
▲
▲
▲
▲
… 13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Opentel osd 3000 ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Opentel osd 3000 ci in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info