Manual Onnicare Astro (page 7 of 40) (English, German, Dutch, French)

682017

Zoom out

Zoom in

1/40

You can take a picture of your baby or upload a picture from your

phone, or add a picture later. Add the baby’s name and other

information, and click “Save”. You can come back to this page at

any time from the ”My Babies” list.

SETTING UP THE MONITOR

Make sure you have your phone connected to a 2.4GHz WiFi

network before plugging in Astro.

Once plugged in, the signal light will start a sequence. When the

signal light is ﬂashing green, go back to the app in your phone. (Log

in if needed.)

Press the “MONITOR” tab and Select “Set up Astro”.

Scan the QR code from the device using Onni Baby app.

If you want, you can edit the monitor name (for example: Baby’s

room). Select “Save” to proceed.

Enter your WLAN password. The default WLAN is the one you

have active on your phone. If you want to use another available

WLAN network, ﬁrst connect your phone to that network and

then switch on the monitor, after it’s ready for new WLAN setup,

you will see ﬂashing green signal light. Then go to “Monitor” tab in

your app and click “settings” link. That will open the WLAN setup

view to add WLAN password.

Click “Save”, and your new Astro will be connected to the baby

proﬁle you’ve just created. Once Astro’s signal light turns ﬂat

green, you can start monitoring.

NOTE: We recommend using WPA security types. WEP security

type doesn’t work with all routers, and if the SSID names contains

spaces (example: home router), the connection can fail.

If your router is set for enabling MAC addresses or auto channel

selection, you may experience some diculty in setting up Astro.

If that’s the case, disable MAC address ﬁltering and try selecting

2.4 GHz band on your router and assign a ﬁxed channel (11).

ENG

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onnicare Astro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onnicare Astro Manual

Product: