645297
23
Zoom out
Zoom in
Previous page
1/152
Next page
> Prima di iniziare > Collegamento > Setup > Riproduzione > Nome dei componenti
23
It
Altri
Ascolto della radio
1. Premere ripetutamente TUNER (a) sul telecomando per
selezionare "AM" o "FM" sul display.
2. Premere MODE (c) sul telecomando in modo che sul
display appaia "TunMode: Auto".
3. Quando si premono i tasti cursore / (b) sul
telecomando, ha inizio la sintonizzazione automatica, e
la ricerca si arresta quando viene trovata una stazione.
Quando viene sintonizzata una stazione radio, sul
display si accende l’indicatore "TUNED".
È possibile memorizzare fino a 40 stazioni.
1. Sintonizzarsi sulla stazione radio AM/FM che si
desidera registrare.
2. Premere MEMORY (d) sul telecomando in modo che sul
display il numero preimpostato lampeggi.
3. Mentre il numero preimpostato lampeggia (circa 8 secondi),
premere ripetutamente i tasti cursore
/
(b) sul
telecomando per selezionare un numero compreso tra 1 e 40.
4. Premere nuovamente MEMORY (d) sul telecomando
per registrare la stazione. Il numero preimpostato
smette di lampeggiare dopo la registrazione. Per
selezionare una stazione radio preimpostata, premere i
tasti cursore / (b) sul telecomando.
0
Per eliminare una stazione preimpostata, premere i tasti
cursore
/
(b) sul telecomando per selezionare il
numero preimpostato che si vuole eliminare, premere
MEMORY (d) sul telecomando, quindi premere CLEAR
(e) mentre lampeggia il numero della stazione
memorizzata. Il numero sul display si spegne dopo la
cancellazione.
Impostazione passo frequenza
Premere il pulsante sul telecomando per selezionare "7.
Miscellaneous" – "Tuner" – "AM/FM Frequency Step" o "AM
Frequency Step" e selezionare il passo della frequenza per la
propria area. Per i modelli per Taiwan, al momento dell'acquisto
l'impostazione è "10 kHz / 0.2 MHz". Modificarla a "9 kHz /
0.05 MHz". Notare che quando si modifica questa impostazione,
vengono eliminate tutte le radio preimpostate.
a
b
c
d
e
Multi-zona
Sono necessarie delle impostazioni se sono stati collegati
dei diffusori nella stanza separata (ZONE 2) usando i cavi
dei diffusori. Se non sono state effettuate le impostazioni
Multi Zona (
P19) in Initial Setup, premere il tasto sul
telecomando ed impostare "2. Speaker" – "Configuration"
– "Zone Speaker" su "Zone 2".
Riproduzione
1. Tenendo premuto MODE (a) sul telecomando, premere
ZONE 2 (b) per almeno 3 secondi finché l'indicatore
remoto non lampeggia due volte.
0
Il telecomando passa alla modalità di comando
ZONE 2.
2. Puntare il telecomando verso l’unità principale e
premere
Í
(d).
"Z2" si accende sul display dell’unità principale.
3. Premere il pulsante del selettore di ingresso (e)
corrispondente all'ingresso che si desidera riprodurre
nella stanza separata. Per controllare sull’unità
principale, premere ZONE 2 e, entro 8 secondi, premere
il pulsante del selettore di ingresso dell’ingresso da
riprodurre in una stanza separata. Per riprodurre la
stessa sorgente nella stanza principale e in quella
separata, premere due volte ZONE 2 sull'unità
principale.
0
Non è inoltre possibile selezionare ingressi diversi
per la stanza principale e una stanza separata con il
selettore di ingresso "NET" o "BLUETOOTH". Non è
inoltre possibile selezionare stazioni diverse per la
Per ripristinare la modalità di comando stanza
principale sul telecomando: Tenendo premuto MODE (a)
sul telecomando, premere MAIN (c) per almeno 3 secondi
finché l'indicatore remoto non lampeggia una volta.
d
e
a
b
c
SN29402166_TX-NR656_BAS_It.book 23 ページ 2016年1月28日 木曜日 午前11時26
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR656 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR656 in the language / languages: German, Dutch, Italian, Swedish, Finnish as an attachment in your email.

The manual is 16,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR656

Onkyo TX-NR656 User Manual - English - 92 pages

Onkyo TX-NR656 User Manual - French, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info