553756
72
Zoom out
Zoom in
Previous page
1/76
Next page
72
For digital sources, sound is sometimes not
output depending on media type.
Format of digital input source is fixed. Other digital formats
will not be output.
Set Digital Format to All in the Audio Setup sub-menu
of the Input Setup menu (page 35).
For DTS and PCM sources, noises or incorrect
starts occur when the digital source is played.
Digital Format settings is incorrect.
Try setting Digital Format to the same as the input source
in the Audio Setup sub-menu of the Input Setup menu
(page 35).
Operation of fan is heard.
TX-DS787 is equipped with internal ventilation fan to prevent
overheating. This is not a malfunction.
Also refer to the respective instruction manuals of the compact
disc player, DVD player, video cassette recorder, TV monitor,
etc., that compose your entertainment system.
The TX-DS787 contains an internal microcomputer that performs
high-level operations. However, on extremely rare occasions,
noise or interference from an external source or static electricity
may cause faulty operation. If this occurs, unplug the power cord
from the wall outlet, wait five or more seconds, and then plug it
back in. This should correct the situation.
*To reset the surround mode and other settings to the factory
default settings, hold down the VIDEO 1 button with the TX-
DS787 turned on and then press the REC OUT button. CLEAR
appears in the front display and the TX-DS787 enters the standby
state.
REMOTE CONTROLLER
Front panel controls function but remote
controller controls do not.
No batteries in remote controller.
Insert batteries.
Batteries have worn out.
Replace batteries.
Remote controller is not pointed at the remote sensor of the TX-DS787.
Point the remote controller at the remote sensor of the TX-DS787.
Remote controller is too far from the TX-DS787.
Operate the remote controller within 16 feet (5 meters).
Remote controller is functioning in a different mode
Press the AUDIO MODE button.
OTHER
LATE NIGHT function cannot be used.
Playback source is not Dolby Digital encoded.
Check that the DOLBY DIGITAL indicator lights up on
the display.
Re-EQ function cannot be used.
Listening mode is set to Stereo, Theater-Dimensional or
Direct.
See table on page 44.
Parameter cannot be set for Front Effect, Room
Size, etc.
Parameter may not be able to be set depending on the listening
mode.
See table on page 44.
Multichannel audio is not output.
To listen to multichannel audio, Yes must be selected in the
Multichannel sub-menu in the Input Setup menu. Also, it is
necessary to select Multichannel with the AUDIO
SELECTOR button.
Check that the component is connected to the MULTI
CHANNEL INPUT port and check the OSD Menu settings.
Components in remote zone (Zone 2) do not
operate properly.
Components are incorrectly connected.
Check connections.
Objects are interfering with remote controller signals.
Move inferring objects away from path of remote
controller signals.
Troubleshooting guide
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS787 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS787

Onkyo TX-DS787 User Manual - French - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info