452194
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
Troubleshooting
If the PA-MC5500 fails to function normally, first check
the following points before contacting your Onkyo
dealer. If the problem is not solved after going through
the following list, unplug the power cord and contact
your Onkyo dealer.
No power.
Power cord is not correctly plugged into AC outlet/
Inlet.
Plug the power cord into the AC outlet/Inlet prop-
erly.
POWER switch is not set to ON position.
Set the POWER switch to ON.
Power turns on but no sound.
Incomplete connections.
Check speaker cable connections.
Insert all plugs firmly into jacks.
No input signal from control amplifier.
Check for input signal from control amplifier.
Incorrect INPUT SELECT switch setting.
Set INPUT SELECT switch to correct setting.
The STANDBY indicator flashes red.
The protection circuitry has been activated.
Remove the power cord from the wall outlet
immediately. Set the POWER switch to OFF, discon-
nect all speaker cables and input sources, and then
leave the amplifier with its power cord disconnected
for 1 hour. After that, reconnect the power cord, set
the POWER switch to ON. If the amplifier stays on,
disconnect the power cord, and reconnect your
speakers and input sources. If the amplifier turns off,
disconnect the power cord, and contact your Onkyo
dealer.
The 12V trigger of the PA-MC5500 does not
react to that of the PR-SC5507.
Connection between the 12V trigger terminals is
incomplete.
Connect the cables to the terminals firmly.
Humming or other noise is heard.
Input cable connection is incomplete.
Insert the input cable to pin jack or connector
completely.
Noise from power cord or power transformer affects
the input cable.
Keep power cord or power transformer away from
the input cable.
Power cord or speaker cables are bundled together
with pin cords.
This may cause humming or noise. Do not bundle
power cord or speaker cables with pin cables
together.
Connection to the input terminals is not complete or
not appropriate.
For each channel’s input terminals, connect cables
or cords to either balanced input terminal or audio
input terminal only and switch the INPUT SELECT
switch accordingly.
Avoid connecting the cables or cords to the input ter-
minals that will not be used.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PA-MC5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PA-MC5500 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PA-MC5500

Onkyo PA-MC5500 User Manual - German, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info