136555
64
Zoom out
Zoom in
Previous page
1/68
Next page
64
Troubleshooting
If you have any trouble using your DV-SP502/DV-SP502E, check the following table for possible causes and remedies.
If you still can’t resolve the issue yourself, please contact your Onkyo dealer.
The disc won’t play or is automatically ejected after loading.
Make sure the disc is free from dirt and dust and is not damaged (page 10).
Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.
Incompatible region number: If the region number on a DVD-Video disc does not match the number on the player,
the disc cannot be used (page 55).
Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player near an air-condi-
tioning unit.
Disc is loaded upside down: Reload the disc with the label side face up.
DVD-Audio playback stops.
The disc may have been illegally copied.
Picture playback stops and the operation buttons cannot be used.
Press , then start playback again ( ).
Press and hold the front panel. STANDBY/ON button for about 10 seconds to switch the unit off, then press again to
switch back on.
Switch the power off once, unplug from the wall socket, then plug back in and switch on again using the front panel.
STANDBY/ON button.
New settings made in the Setup screen menus while a disc is playing are ineffective.
Some settings can be changed while a disc is playing, but are not effective until the disc is stopped then restarted:
Press , then startplayback again ( ).
Settings are canceled.
When the power is cut due to power failure or by unplugging the power cord, settings will be canceled: Press.
STANDBY/ON on the front panel to turn the player off. Wait for --GOOD BYE-- to disappear from the display, then
unplug the power cord.
No picture/No color.
Incorrect video connections: Check that connections are correct and that plugs are inserted fully. Also check the video
cable for damage.
TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected equipment.
The video output is set to progressive but your TV/monitor is not compatible with progressive scan: See page 21 for
how to set to interlace.
Screen is stretched or aspect does not change.
The TV Screen setting in the Initial Settings menu is incorrect. See page 54 for how to set it correctly for your TV/
monitor.
Picture disturbance during playback or the picture is dark.
This player is compatible with Macro-Vision System copy guard. Some discs include a copy prevention signal, and
when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV.
This is not a malfunction.
Due to the player’s copy protection circuits, connection of this device through a VCR or an AV selector may prevent
recording or cause picture problems. This is not a malfunction.
No audio, or audio is distorted.
No audio is output during slow motion playback or when scanning discs other than audio CDs and SACDs.
Some DVD discs do not output digital audio: Switch your amplifier to the player’s analog outputs.
Check that the disc is free from dust and dirt, and that it is not damaged (page 10).
Check that all interconnects are firmly inserted.
Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the cable for damage.
Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.
Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).
DV-SP502/DV-SP502E
DV-SP502E_En.book Page 64 Friday, July 16, 2004 3:34 PM
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dv sp 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dv sp 502 in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info