160368
58
Zoom out
Zoom in
Previous page
1/60
Next page
58
Troubleshooting—Continued
No sound is heard from a connected component.
Make sure the optical digital audio cable is not bent or damaged.
On the external component, set the digital output format to PCM, as the CD receiver supports only PCM signals.
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer.
If the turntable doesn’t have a phono equalizer built-in, you must provide one.
Timer playback or recording doesn’t work.
Make sure the clock has been set correctly (see page 49).
•Timed operation will fail if the CD receiver is on at the specified On time, so make sure it’s set to Standby (see
page 53).
The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 51).
If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled.
Make sure the cables and analog audio cables are connected correctly (see pages 19 to 25).
If you’re using an Onkyo component for timed playback or recording, you must set the Input Display to match that
component (see page 29).
The time is not displayed in Standby mode.
Set the CD receiver so that the time is displayed in Standby mode (see page 50).
Timers
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure that the material will be recorded correctly.
The CD receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe
interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this
should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo cr 515 dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo cr 515 dab in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info