159239
37
Zoom out
Zoom in
Previous page
1/40
Next page
37
Troubleshooting
If you have any trouble using your CR-505DAB, check the following table for possible causes and remedies. If you still can’t
resolve the issue yourself, please contact your Onkyo dealer.
Trouble Possible Cause Remedy
Can’t turn on the CR-
505DAB?
The power cord is not connected properly.
Connect the power cord properly to a suitable
wall outlet (page 16).
There’s no sound coming
from the speakers?
The speaker cables are not connected prop-
erly.
Check the speaker connections and make sure
that none of the wires are touching each other,
other connectors, or any metal parts
(page 11).
The volume is set at minimum. Turn up the volume (page 19).
The CR-505DAB is muted. Unmute the CR-505DAB (page 31).
A pair of headphones is connected.
Turn down the volume, then disconnect the
headphones (page 19).
The wrong input source is selected. Check the input source setting (page 19).
A connecting cable may be damaged.
Check your connecting cables for signs of
damage and replace as necessary.
Sound is coming from only
one speaker?
The other speaker’s cable is not connected
properly.
Check the speaker connections and make sure
that none of the wires are touching each other,
other connectors, or any metal parts
(page 11).
The remote controller
doesn’t work?
The batteries are used. Replace with new batteries (page 7).
The batteries are installed incorrectly.
Check the batteries and correct as necessary
(page 7).
You’re not pointing the remote controller at
the CR-505DAB’s remote sensor.
Point the remote controller at the CR-
505DAB’s remote sensor (page 7).
A strong light source is interfering with the
CR-505DAB’s remote sensor.
Make sure that the CR-505DAB is not sub-
jected to direct sunshine or inverter-type fluo-
rescent lights. Relocate if necessary.
AM reception is hindered
by a buzzing noise, espe-
cially at night or with weak
signals?
Interference caused by electrical equip-
ment, including fluorescent lights.
Relocate your AM antenna.
Install an outdoor AM antenna (page 13).
AM reception is hindered
by a high-pitched noise?
Interference caused by your TV.
Move the AM loop antenna as far away as
possible from your TV.
Move the CR-505DAB as far away as possi-
ble from your TV.
Reception is hindered by a
crackling noise?
Interference is being caused by fluorescent
lights being turned on or off, or by the igni-
tion systems of passing cars.
Install an outdoor antenna as far away as pos-
sible from nearby roads.
Move your antenna as far away as possible
from fluorescent lights.
Adjust the position or direction of your out-
door antenna.
FM reception and stereo
separation are poor even
though the Tuning and
“ST” (FM stereo) indica-
tors are shown.
Tall buildings, mountains, or hills are caus-
ing wave reflections that interfere with the
main signal.
Try an FM antenna with better directionality.
The station’s signal is too strong. Try an indoor FM antenna.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo cr 505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo cr 505 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info