462121
41
Zoom out
Zoom in
Previous page
1/44
Next page
41
En
Others
Troubleshooting
If you have any trouble using the integrated amplifier,
look for a solution in this section.
If you can't resolve the issue yourself, try resetting the
integrated amplifier before contacting your Onkyo dealer.
To reset the integrated amplifier to its factory defaults, see
“Restoring the Default Settings” ( page 40).
Can’t turn on the Integrated Amplifier.
Make sure that the power cord is properly plugged into
the wall outlet ( page 16).
Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
The Integrated Amplifier turns off
unexpectedly.
When the Auto Standby function is activated, the
integrated amplifier will automatically enter Standby
mode ( page 38).
• When the protection circuit is activated (because of
speaker short-circuit, overload, or over-current), the
integrated amplifier enters Standby mode. Remove the
source of the problem and turn the integrated amplifier
back on.
There’s no sound.
• Make sure the integrated amplifier’s volume control is
not set to minimum ( page 27).
• Make sure the correct input source is selected
( page 28).
• Make sure the integrated amplifier is not muted
( page 31).
• Make sure the speakers are connected correctly
( page 13).
• Check all connections and correct as necessary
( page 13).
While headphones are connected, the speakers and PRE
OUT output no sound ( page 31).
The integrated amplifier does not support digital formats
other than PCM. Inputting a digital format other than
PCM will cause loud noise.
If “ROUTE” is set to anything other than “NORMAL”,
make sure that each component is connected accordingly
( page 23 to 25, 39).
The sound quality is not good.
Make sure the speaker cables are connected with the
correct polarity ( page 13).
Make sure all audio connecting plugs are pushed in all
the way ( page 16).
The sound quality can be affected by strong magnetic
fields, such as those from a TV. Try moving any such
devices away from the integrated amplifier.
If you have any devices that emit high-intensity radio
waves near the integrated amplifier, such as a cellular
phone that’s being used to make a call, the integrated
amplifier may output noise.
Headphone output is intermittent or there’s
no sound.
This may be due to dirty contacts. Clean the headphones
plug. See your headphones’ instruction manual for
cleaning information. Also, make sure that the
headphones cable is not broken or damaged.
Make sure that “ROUTE” is not set to “MAIN
( page 39).
Audio performance
• Audio performance will be at its best about 10 to 30
minutes after the integrated amplifier has been turned on
and had time to warm up.
Using cable ties to bundle audio cables with speaker or
power cables may degrade the sound quality, so refrain
from doing it.
Depending on the country, the integrated amplifier may
be polarity-sensitive. In this case, plug the power cord in
a way that provides the best sound quality.
Install the integrated amplifier on a sturdy rack or shelf.
Position it so that its weight is evenly dispersed on its
four legs. Do not install the integrated amplifier in a
place with vibration or an unstable location.
Plug the power cord into an AC wall outlet.
Power
Audio
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9070 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9070

Onkyo A-9070 User Manual - German - 88 pages

Onkyo A-9070 User Manual - Dutch - 88 pages

Onkyo A-9070 User Manual - French - 88 pages

Onkyo A-9070 User Manual - Italian - 88 pages

Onkyo A-9070 User Manual - Swedish - 88 pages

Onkyo A-9070 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info