673472
1
Zoom out
Zoom in
Previous page
1/2
Next page
ESPAÑOL
B  SET UP BY CODE
HOW TO SET UP YOUR REMOTE
I
f your brand is not listed in section A, you can set up your device by trying codes individually.
To do this:
1. T
urn your device on (not on standby).
2. Locate the brand of your device in the code list (pages 146-157). Codes
a
re listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
4. Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
5. Enter the rst 4 digit code listed for your brand (e.g. 0556 for a Bennett
TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press the POWER key.
8. If the device turns off, your remote is ready to use. If not, repeat steps 3-7 with the next code
in the list.
Some codes are quite similar. If you nd that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.
ESPAÑOL
URC7145
SIMPLE SET UP GUIDE
ENGLISH
Open the battery door.
Insert 2 AAA batteries.
ENGLISH
KEY TABLE
T
hank you for purchasing the One For All 4. Now you can control all of your Audio/Video
devices with a single remote, while enjoying extra features such as the ability to combine devices
i
n a single Activity Mode, sending multiple commands on a single key press (macros) and being
a
ble to customise the remote control to your exact requirements.
To get started with your new remote, the rst step is to set it up to control all of your
Home Cinema devices.
HOW TO SET UP YOUR REMOTE
A – SIMPLESET
S
impleSet is a quick and easy way of setting up the remote to control the most popular brands of
each device type with only a few key presses, typically in under a minute per device. The rst step
is to select which device you are going to set up. The following is a list of Device Modes on the
r
emote control, and the Device types that can be set up on that mode:
Device Mode Type of device
TV TV, HDTV, LED, LCD, Plasma, Projector
STB Set Top Box, Satellite Receiver, Cable Converter,
Freeview, DVB-T, IPTV
BLU Blu-ray, DVD, DVD Home Cinema
AUD Audio, AV Receiver, Amplier, Tuner, Sound Bar
For each Device type, there is a list of the top brands, each with a number assigned to it,
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
TV
1 Alba / Bush / Goodmans
2 Grundig
3 LG
4 Panasonic
5 Philips
6 Samsung
7 Sharp
8 Sony
9 TCL / Thomson
0 Toshiba
STB: Sat, Cable, DVB-T
1 BSkyB / Sky Ireland / Orange
2 Canal+ / CanalSat / Digital+
3 Dream Multimedia / TechniSat
4 DStv / Multichoice / Foxtel / Sky New
Zealand
5 Freebox / Tricolor TV / Vu+
6 Humax
7 Samsung
8 Sky Italia / SFR / Neuf TV
9 Sky Deutschland / Österreich /
T-Home / Deutsche Telekom
0 UPC / Cablecom / UPC Direct /
Virgin Media
MAGIC: Used to set up
your remote
+/-: Channel Up and Down
MENU: Show the menu of
the current device
EXIT: Exit from the Menu of
the current device
AV: Select the input on
the current device
INFO: Displays info of
current playback
POWER:
Power on/o
WATCH MOVIE: Combines 2 or
more devices into one mode
for movie viewing
PP: Previous Program, Last
Channel
3D: Access 3D functionality if
applicable
Red, Green, Yellow, Blue –
Fastext/Quick access keys
PLAYBACK: Playback keys
for the current device
MODE: Scroll through
the devices your remote is
set up to control
WATCH TV: Combines 2 or
more devices into one mode
for TV viewing
FAV: Favourite Channels
GUIDE: TV Guide, EPG
SMART: Access internet
and Smart features
of your TV or internet-
connected device
BACK: Back one step in
the Menu of the current device
VOL: Volume Up, Down and
Mute
16:9: Adjust the Aspect
Ratio (screen size) of your TV
or Set Top Box
LIST: Displays a list of
recorded programmes
A – SIMPLESET
HOW TO SET UP YOUR REMOTE
BLU: Blu-ray, DVD
1 Denon, Harman/Kardon
2 J
VC
3 L
G
4 P
anasonic
5 Philips
6 Pioneer
7 S
amsung
8 S
ony
9 T
oshiba
0 Yamaha
To set up your device
1. Turn on your device (not on standby) and point the OFA remote towards it.
2. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
3. Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
4. Hold down the digit for your brand and device as listed above (e.g. 6 for
Samsung TV).
5. The remote will send Power every 3 seconds until your device switches off.
6. As soon as your device switches off, release the digit.
7. The LED will blink twice and go out. The remote should now operate your device.
If you nd one or more keys do not work as you expect, start again at step 1 – the remote will
start with the next code in the memory.
AUD: AV Receiver, Amp, Tuner, Sound Bar
1 Denon
2 Harman/Kardon / JBL
3 LG / JVC
4 Onkyo
5 Panasonic / Technics
6 Philips / Marantz
7 Pioneer
8 Samsung
9 Sony
0 Yamaha
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC7145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC7145 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All URC7145

One for All URC7145 User Manual - Dutch, Danish, Italian, Polish, Portuguese, Swedish, Portuguese, Spanish, Norwegian, Finnish - 164 pages

One for All URC7145 Additional guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info