585195

One for All URC 8210 - Kameleon 10 Manual

5
Zoom out
Zoom in
Previous page
1/247
Next page
4 WWW.ONEFORALL.COM
This product features an “EL” panel (Electro Luminescence technology) which is
activated by touching screen and remote simultaneously and/or by keypress. In
order to save battery life, the “EL” screen will stay illuminated for 8 seconds
during normal use. If you want you can change the
“EL” Screen activation
setting
from activation by touching screen and remote simultaneously to activa-
tion by keypress. If you want you can also change the
“EL” On time setting. It
is also possible to adjust the
“EL” Screen brightness-settings on the
KAMELEON 10 “EL” panel. One of the key features of the KAMELEON 10 is the
“EL” display, which changes to suit the device you are controlling. The overview
on page 6 will show you all the possible functionkeys.
“EL” Screen activation setting
The KAMELEON 10 features an “EL” panel which is activated by touching screen
and remote simultaneously or by keypress.
It is possible to
lock the KAMELEON 10 to one activation setting:
1. Press and hold the MAGIC key until the rabbit
comes out of the hat (the screen will change to
the setup screen).
2. Press OTHER.
3.
Now press 9 8 9. The IR Indicator will blink twice (or 4 times).
-> If the animated IR Indicator blinks
twice the “EL” panel will be activated only
by touching screen and remote simultaneously.
-> If the animated IR Indicator blinks four times the “EL” panel will be activated
only by keypress.
Simply perform these steps to lock the KAMELEON 10 to the activation
setting that you prefer.
The Keypad
= MAGIC (hat) key
= The IR Indicator that will light up during
programming
Light sensor
To conserve battery life, your KAMELEON 10 remote is fitted with a light sensor,
which adjusts the brightness of the display to suit its environment. For example, it is
not necessary to have the display at full brightness in a darkened room, so the
remote dims the display somewhat.
If you do not require this function, it can be disabled. To do this:
1. Press and hold down the Magic key (for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press OTHER.
3. Press 9 9 9. The IR Indicator will blink four times and the light
sensor is now disabled.
To re-enable it, repeat the above steps and the IR Indicator will blink twice.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8210 - Kameleon 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8210 - Kameleon 10 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info