Manual One for All URC 7800 (page 13 of 17) (English)

492755

Zoom out

Zoom in

1/17

Miscellaneous Audio: Use the AUX or RCVR Key

For example, to set up a Cassette Player on the VCR key:

1. Turn on your Cassette Player and insert a tape.

2. Press VCR and release. Press and hold SETUP until

the Cinema 7+™’s red light blinks twice, then

release SETUP.

3. Enter the first four-digit Cassette Player code listed

for your brand in the “Setup Codes For Audio

Cassettes” section. If you perform this procedure

correctly, the red light will blink twice when you enter

the final digit of your code.

4. Aim the Cinema 7+™ at your Cassette Player and

press PL (Play).Your unit should play the tape. If it

does not respond, repeat steps 2-4, trying each

code listed for your brand until you find the one that

works.

5. Your Cinema 7+™ is now programmed to operate

your Cassette Player.

Remember, if you want to use your Cinema 7+™ to operate

your Cassette Player, press the VCR key first.

Setup Codes For Audio Cassettes

Aiwa 0029, 0197

Bang & Olufsen 0219

Carver 0029

Denon 0076

Harman/Kardon 0182

JVC 0244

Magnavox 0029

Marantz 0029

Optimus 0027, 0220

Philips 0029

Pioneer 0027, 0220

Sansui 0029

Sony 0170, 0243, 0291

Victor 0273

Wards 0027

Yamaha 0097

Setup Codes For IR Home Automation

GE 0240

Lutron 0318, 0597

One For All 0167

RadioShack 0240

Security System 0167

Universal X10 0167

X10 0167

Setup Codes For MiniDisc

Denon 0873

JVC 0826, 0681

Onkyo 0868

Sharp 0861

Sony 0490

Setup Codes For Video Accessories

Archer 0160

GC Electronics 0160

Jebsee 0160

Magnavox Web-TV

0818

Philips Web TV 0818

RadioShack 0160

TeleCaption 0171

Sony Web-TV 0850

Setup Codes For Miscellaneous Audio

2524

Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com

NOTE: Steps 4 through 6 need to be completed within 10

seconds. Please read the next three steps before proceed-

ing.

4. Press and release the L key in which the new fea-

ture is to be learned. The Cinema 7+™’s red light

will flash rapidly.

5. Align your original remote control with the arrow mark

to the left of the LED on your Cinema 7+™ remote

control (see diagram below)

6. On your original remote, press and hold the key (fea-

ture) you want to learn until the red light on the

Cinema 7+™ blinks twice. (If the red light does not

blink twice, stop and repeat steps 1 through 6.)

NOTE: You can now repeat steps 3 through 6 to learn func-

tions on the other L keys.

7. Press and hold in the SETUP key until the Cinema

7+™’s red light flashes twice to lock in your new fea-

ture. (If the red light does not blink twice, stop and

repeat steps 1 through 6).

8. To test the new feature, press and release the

Device key in which the feature was learned followed

by the L key on which the feature was learned.

Deleting Functions from the L Keys:

1. Press and hold in the SETUP key until the Cinema

7+™’s red light flashes twice and then release the

SETUP key.

2. Enter in 9 - 7 - 6.

3. Press and release the Device key (e.g., TV) where

the learned feature to be deleted is stored.

4. Press the L key to be deleted twice. The Cinema

7+™’s red light will blink twice after the second

press of the L key.

SETTING UP OTHER COMPONENTS

In addition to the components labeled on the device keys (TV, VCR,

DVD/LD, CBL/SAT, etc.), the Cinema 7+™ can also operate the following

components: Cassette Decks, Infrared Home Automation, MiniDisc, Video

Accessories and Miscellaneous Audio Components (Graphic Equalizers and

Digital Music Service Boxes).

The Setup Codes for these components can be accessed under the follow-

ing device keys:

Cassette Decks: Use the VCR Key

IR Home Automation: Use the CD Key

MiniDisc: Use the CD Key

Video Accessories: Use the CBL/SAT Key

(Note : WebTV found under Video Accessories)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 7800 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 7800 Manual

Product: