Manual One for All URC 7800 (page 5 of 17) (English)

492755

Zoom out

Zoom in

1/17

Web Site : http://www.oneforall.com

POWER. The TV should turn off. If it does not

respond, repeat steps 2-4, trying each code listed for

your brand until you find the one that operates your

TV.

NOTE: If you have tried all the codes listed for your

brand and your TV does not respond, try using the

search method found on page 22.

5. Your Cinema 7+™ is now programmed to operate

your TV. Write your TV code in the boxes to the left

for future reference.

Remember, if you want to use your Cinema 7+™ to operate

your TV, press the TV key first.

Setup Codes For TVs

Admiral 0093, 0179, 0180, 0016, 0047

Aiko 0092

Akai 0030

Alaron 0179

Ambassador 0177

Ampro 0751

Anam 0180

AOC 0019, 0185, 0003

Audiovox 0451, 0092, 0180, 0003

Baysonic 0180

Beaumark 0017, 0030, 0179

Belcor 0019

Bell & Howell 0154, 0016

Bradford 0180

Brockwood 0019

Candle 0056, 0030

Carnivale 0030

Carver 0054

Celebrity 0000

Cineral 0451, 0092

Citizen 0060, 0092, 0030, 0056, 0039

Clairtone 0185

Concerto 0056

Contec 0180, 0185

Craig 0180

Crown 0180, 0039

Curtis Mathes 0030, 0060, 0154, 0039, 0466, 1147, 1347

CXC 0180

Daewoo 0451, 0092, 0019, 0039, 0624

Daytron 0019

Denon 0145

Dumont 0017, 0019

Dwin 0720, 0774

Electroband 0000, 0185

Emerson 0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,

0282, 0039, 0624

Envision 0030

Fisher 0154, 0159

Fujitsu 0179

Funai 0171, 0179, 0180

Futuretech 0180

GE 0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347

Gibralter 0019, 0030, 0017

Goldstar 0019, 0030, 0178, 0039

Gradiente 0053, 0056

Grunpy 0179, 0180

Hallmark 0178

Harvard 0180

Hitachi 0145, 0151, 0056

Infinity 0054

JBL 0054

JCB 0000

tional details.

INSTALLING THE BATTERIES

Your Cinema 7+™ requires four (4) new AAA alkaline batter-

ies. To install the batteries:

1. On the back of the Cinema 7+™, pull back on

the tab and lift the battery cover off.

2. Match the + and - marks on the batteries to the

+ and - marks in the battery case, then insert

the

batteries.

3. Press the battery cover back into place.

4. Test the unit by pressing POWER. If the batter-

ies are inserted correctly, the red light will blink.

NOTE: Removing the batteries will not require you to repro-

gram your remote control because the Cinema 7+™ has

unlimited memory backup.

SETTING UP YOUR COMPONENTS

Programming the Cinema 7+™ to operate your TV:

NOTE: If you are trying to program a TV/VCR combination,

do not perform these instructions. Instead, follow the steps in

“Programming the Cinema 7+™ to operate your TV/VCR

Combo

”

starting on page 13.

Locate the brand name of your TV in the “Setup Codes For

TVs” section (starting on the next page), and write it in the

space below.

TV Brand: ________________________________

The brands are listed in alphabetical order with the most

popular codes listed first.You will use one of these codes to

program your Cinema 7+™ to operate your TV as follows:

1. Turn on your TV.

2. On the Cinema 7+™, press TV and release. Press

and hold SETUP until the red light blinks twice, then

release SETUP.

3. Enter the first four-digit TV code listed for your

brand. If performed correctly, the red light will blink

twice when you enter the final digit.

4. Aim the Cinema 7+™ at your TV and press

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 7800 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 7800 Manual

Product: