122564
10
Zoom out
Zoom in
Previous page
1/34
Next page
8 WWW.ONEFORALL.COM
Setting Up Your Other Devices
To set up the ONE FOR ALL 4 Digital for your Television, Video
Recorder or DVD Player, Satellite Receiver or Cable Converter, follow
the instructions below.
Example: to set up the ONE FOR ALL for your TV:
Find your Television code in the
Set-Up Code section (starting on page 11). Codes
are listed by brand name. The most popular code
is listed first. Make sure your Television is
switched on (not in standby).
Press and release your ONE FOR ALL 4 Digital’s TV
key.
Press and hold down the MAGIC key until the
device key blinks twice (the device key will blink
once, then twice).
Enter your four-digit TV code using the number
keys. The device key will blink twice.
Now, aim the ONE FOR ALL 4 Digital at your
Television and press POWER. If your Television
switches off, your ONE FOR ALL 4 Digital should
be ready to run your Television.
If your device (television) does not respond to the code
entered, follow steps 1-5 with each code listed for your
brand. If none of the codes listed for your brand operate
your device (television), or if your brand is not listed at
all, try the search method described on page 9.
Write your code in the four boxes provided in the battery
compartment and on page 11 for easy future reference.
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0
0
0
9
0
0
8
7
, 0
0
9
3
, 0
3
6
3
, 0
4
1
0
2
1
7
, 0
2
1
6
0
2
6
4
0
5
1
6
0
0
8
7
0
2
1
6
, 0
0
0
9
, 0
0
3
7
, 0
0
0
3
7
, 0
2
7
4
0
3
6
1
, 0
2
0
8
, 0
3
7
1
,
1
2
3
5
6
7
Installation
Important notes:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- For VCR setup: If your VCR’s original remote control does not have a
POWER key, press PLAY instead of POWER during step 5.
- Remember to press the correct device mode key before operating your
device. Only one device can be assigned to each device mode key. If your
original remote control operates more than one device, you need to set up
each device separately.
4
____
To set up for a second TV, VCR/DVD or SAT/CBL (See Changing the
Mode of a Device Key, Page 29).
(*) To use the AUX key (see page 28).
Devices can be found under the following keys:
Television
Video Recorder/DVD
Satellite Receiver /
Cable Converter
(*) Television /
(*) Video Recorder /
(*) Satellite Receiver/
Cable Converter
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 7544 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 7544 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info