492738
5
Zoom out
Zoom in
Previous page
1/112
Next page
.
Verificare, per prima, che la marca del dispositivo in uso sia presente nell'elenco
di marche “SimpleSet" e quale "numero" è stato assegnato a tale marca (ad
esempio, tv Bush = 1).
1) Tenere premuto il tasto MAGIC per 3 secondi fino a quando l'interruttore di modalità
(LED blu) resta acceso.
2) Selezionare il dispositivo che si desidera configurare (ad esempio il televisore).
3) Tenere premuto il tasto che riporta il numero relativo alla marca del dispositivo in uso
(ad esempio per tv Bush = premere 1) fino a quando il dispositivo non si spegne
(massimo 36 secondi). Il LED blu si spegne ogni 3 secondi non appena viene inviato un
"segnale di alimentazione". Per consentire il completamento
della configurazione, rilasciare il tasto non appena il dispositivo si spegne.
• Sua marca non è presente nell'elenco "SimpleSet"? --> Andare alla sezione Impostazione con codice diretto (p. 28).
• I comandi di ONE FOR ALL non funzionano correttamente? --> Ripetere semplicemente SimpleSet
• SimpleSet non e successivo? --> Andare l’Impostazione con codice diretto oppure provare con il Metodo di ricerca.
Begin met controleren of het merk van uw specifieke apparaat voorkomt in de
“SimpleSet”- merkenlijst en ga na welke “cijfertoets” is toegewezen aan uw merk
(bijv. Bush-tv = 1).
1) Houd MAGIC 3 seconden ingedrukt totdat de modusindicator (blauwe LED) blijft branden.
2) Selecteer het apparaat dat u wilt instellen (bijv. tv).
3) Druk op de "cijfertoets" voor uw merk (bijv. 1 voor Bush-tv) en houd deze ingedrukt tot
dat uw apparaat wordt uitgeschakeld (max. 36 seconden). De blauwe LED gaat elke 3
seconden uit terwijl er een signaal voor in-/uitschakelen wordt verzonden. Laat de "cijfer
toets" los zodra uw apparaat is uitgeschakeld om de installatie te voltooien.
• Wat moet u doen als uw merk niet voorkomt in de SimpleSet-merkenlijst? --> Ga naar Direct codes instellen (p. 32).
• Worden opdrachten niet correct uitgevoerd op de ONE FOR ALL? --> Herhaal SimpleSet.
• Wat moet u doen als SimpleSet mislukt? --> Ga naar Direct codes instellen of probeer het met de zoekmethode.
Zacznij od sprawdzenia, czy marka danego urządzenia jest na liście „SimpleSet”
oraz sprawdzenia, który „przycisk numeryczny” przypisany jest do tej marki (np.
telewizor Bush = 1).
1) Naciśnij i przytrzymaj przycisk MAGIC przez 3 sekundy, aż kontrolka trybu (niebieska
dioda LED) zacznie świecić się w sposób ciągły.
2) Wybierz urządzenie, które chcesz ustawić (np. telewizor).
3) Naciśnij i przytrzymaj „przycisk numeryczny” dla danej marki (np. dla telewizora Bush =
naciśnij 1), aż urządzenie się wyłączy (maks. 36 sekund). Podczas przesyłania „sygnału
zasilającego”, niebieska dioda LED będzie błyskać co 3 sekundy. Aby zakończyć proces
ustawiania, należy puścić „przycisk numeryczny” w chwili, gdy urządzenie się wyłączy.
• Twoje urządzenie nie znajduje się na liście „Szybkie ustawienie – lista marek”? -> Przejdź do konfiguracji za pomocą kodu (s. 40)
• Pilot ONE FOR ALL nie działa prawidłowo? --> Powtórz szybkie ustawianie
• Szybkie ustawianie nie powiodło się? --> Przejdź do konfiguracji za pomo kodu lub skorzystaj z wyszukiwania.
Začněte kontrolou, zda je značka vašeho konkrétního zařízení uvedena v
přehledu značek sady „SimpleSet“ a ověřte, která „číselná klávesa“ je přiřazena
vaší značce (např. televizor Bush = 1).
1) Stiskněte a na 3 sekundy přidržte tlačítko MAGIC, dokud se kontrolka režimu (modrá
dioda LED) trvale nerozsvítí.
2) Vyberte zařízení, které chcete nastavit (např. televizor).
3) Stiskněte a přidržte číselné tlačítko odpovídající vaší značce (např. pro televizor Bush =
stiskněte 1), dokud se zařízení nevypne (max. 36 sekund). Při odesílání signálu modrá
dioda LED každé 3 sekundy zhasne. Jakmile se zařízení vypne, číselné tlačítko okamžitě
uvolněte. Nastavení se dokončí.
• Pokud není vaše značka uvedena v přehledu značek sady „SimpleSet“ --> Přejděte na Přímé nastavení kódů (s. 44)
• Ovladač ONE FOR ALL neprovádí příkazy správně --> Jednoduše zopakujte sadu SimpleSet
• Použití sady SimpleSet nevede k úspěchu? --> Přejděte na Přímé nastavení kódů nebo zkuste použít Metodu vyhledávání.
Legelőször ellenőrizze, hogy saját készülékének márkája szerepel-e a
„SimpleSet” márkalistában, és keresse meg, hogy melyik számgomb van
hozzárendelve ahhoz a márkához (pl. Bush tv = 1).
1) Nyomja meg és tartsa lenyomva a MAGIC gombot 3 másodpercig, hogy az üzemmód
jelzése (kék LED) folyamatosan világítson.
2) Válassza ki a beállítani kívánt készüléket (pl. tv).
3) Nyomja meg és tartsa lenyomva a készülékének megfelelő számgombot (pl.
Bush tv = 1-es gomb), amíg a készülék kikapcsol (max. 36 másodperc). A kék LED
három másodpercenként, a jelek küldésekor, kikapcsol. A beállítás befejezéséhez
engedje fel a számgombot, miután a készülék kikapcsol.
• Ha a készülékének megfelelő márka nem szerepel a „SimpleSet márkalistában” --> Lépjen a Direktkód-beállításhoz (36).
• Ha a ONE FOR ALL nem hajtja megfelelően végre a műveleteket --> Ismételje meg a SimpleSet műveletet
• Ha a SimpleSet művelet sikertelen --> Lépjen a Direktkód-beállításhoz, vagy próbálkozzon a Kereső móddal.
Italiano
Nederlands
Polski
Magyar
český
WWW.ONEFORALL.COM 5
URC-7140_21t_710439_7950 Manual_gedrukt 06-05-15 09:28 Pagina 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC-7140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-7140 in the language / languages: All languages as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All URC-7140

One for All URC-7140 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 218 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info