492738

One for All URC-7140 Manual

5
Zoom out
Zoom in
Previous page
1/218
Next page
4
WWW.ONEFORALL.COM
Start by checking if the brand of your particular device is listed in the
“SimpleSet” brand list and check which “number key” is assigned to your brand
(e.g. Hitachi tv = 1).
1
) Press and hold MAGIC for 3 seconds until a mode indicator (Blue LED) stays lit.
2
) Select the device you wish to set up (e.g. tv).
3) Press and hold the “number key” according to your brand (e.g. for Hitachi tv = press 1)
until your device switches off (max. 36 seconds). The blue LED will switch off every 3
s
econds as a ‘power signal’ is being sent. Make sure to release this “number key” as soon
as your device switches OFF to complete the set up.
• If your brand is not listed in the “SimpleSet - brand list”? --> Go to the Direct Code Set up (page 8).
• The ONE FOR ALL is not performing commands properly? --> Simply repeat SimpleSet
• If SimpleSet is unsuccessful? --> Go to the Direct Code Set Up or try the Search Method.
Überprüfen Sie zunächst, ob die Marke Ihres Geräts in der Liste „SimpleSet“ auf-
g
eführt und welche Zahlentaste dieser Marke zugeordnet ist (z. B. Hitachi
Fernsehgerät = 1).
1) Halten Sie die MAGIC-Taste 3 Sekunden lang gedrückt, bis die Modus-Anzeige (blaue LED-
A
nzeige) konstant leuchtet.
2) Wählen Sie das Gerät aus, das Sie einrichten möchten, z. B. ein Fernsehgerät.
3) Halten Sie die Ihrer Marke zugeordnete Zahlentaste (z. B. 1 für ein Hitachi Fernsehgerät)
so lange gedrückt, bis sich Ihr Gerät ausschaltet (max. 36 Sekunden). Die blaue LED-
A
nzeige erlischt alle 3 Sekunden, wenn ein “An/Aus (Power) Signal” gesendet wird. Stellen
S
ie sicher, dass Sie die Taste sofort loslassen, wenn sich Ihr Gerät ausgeschaltet hat, um
d
ie Einrichtung abzuschließen.
• Ihre Marke ist nicht in der Liste „SimpleSet“ aufgeführt? --> Befolgen sie bitte die “Direkte Codeeinrichtung” (S. 12).
• Die ONE FOR ALL Fernbedienung führt Befehle nicht richtig aus? --> Wiederholen Sie einfach „SimpleSet“.
•
„SimpleSet“ nicht erfolgreich? --> Befolgen sie bitte die “Direkte Codeeinrichtung” oder versuchen Sie es mit der “Suchmethode”.
Antes de comenzar, compruebe que la marca de su dispositivo aparece en la lista
de marcas de SimpleSet y qué número se le ha asignado (p. ej., tv Hitachi = 1).
1) Mantenga pulsado el botón MAGIC durante 3 segundos, hasta que permanezca encendido
un indicador de modo (LED de color azul).
2) Seleccione el dispositivo que desea configurar (p. ej., tv).
3) Mantenga pulsada la tecla del número asignado a su marca (p. ej., para tv Hitachi = pulse
1) hasta que el dispositivo se apague (máx. 36 segundos). El LED de color azul se apagará
cada 3 segundos mientras se esté transmitiendo la señal. Asegúrese de soltar el botón del
número una vez apagado el dispositivo, con el fin de completar la configuración.
• Su marca no aparece en la lista de marcas de SimpleSet? --> Vaya a la sección de configuración por código directo (p. 20).
• El ONE FOR ALL no realiza los comandos correctamente? --> Repita el proceso de configuración SimpleSet.
• SimpleSet no es satisfactorio? --> Vaya a la sección de configuración por código directo o pruebe el método de búsqueda.
V
érifiez tout d'abord que la marque de votre appareil figure dans la liste «
S
impleSet » et repérez la touche numérique qui y est associée (tv Hitachi = 1,
par exemple).
1) Maintenez la touche magic enfoncée pendant 3 secondes jusqu'à ce que le voyant de
mode (diode bleue) reste allumé.
2) Sélectionnez l'appareil à programmer (« tv » par exemple).
3) Maintenez la touche numérique correspondant à votre marque enfoncée (pour une
télévision Hitachi, par exemple, appuyez sur 1), jusqu'à ce que l'appareil s'éteigne (maxi
mum 36 secondes). La diode bleue s'éteint toutes les 3 secondes pendant l'émission d'un
signal d'alimentation. Relâchez la touche dès que votre appareil s'éteint pour terminer la
configuration.
• La marque de votre appareil ne figure pas dans la liste « SimpleSet ». --> Passez à la Configuration par code (p. 16).
• La ONE FOR ALL ne fonctionne pas correctement. --> Il suffit de recommencer la programmation SimpleSet.
• SimpleSet a échoué. --> Passez à la Configuration par code ou essayez la Methode de recherche.
Comece por verificar se a marca do seu dispositivo específico está listada na lista
de marcas “SimpleSet” e que “tecla numérica” está atribuída à sua marca (por ex.,
Hitachi tv = 1).
1) Prima sem largar MAGIC durante 3 segundos até que um sinal luminoso (LED azul) se
acenda.
2) Seleccione o dispositivo que pretende configurar (por ex., tv).
3) Prima sem largar a “tecla numérica” de acordo com a marca (por ex., para Hitachi tv =
prima 1) até o dispositivo desligar (no máx. 36 segundos). O LED azul desliga-se de 3 em
3 segundos enquanto é enviado um ‘sinal de alimentação’. Certifique-se de que solta esta
“tecla numérica” assim que o seu dispositivo DESLIGAR, para concluir a configuração.
• Sua marca não estiver listada na “SimpleSet - lista de marcas”? --> Avance para a Configuração de Código Directo (p.24)
• O telecomando UNIVERSAL não está a executar os comandos correctamente? --> Basta repetir a SimpleSet
• A SimpleSet não foi concluída com êxito? --> Avance para a Configuração de Código ou o Método de Busca.
Deu
t
s
c
h
En
gl
i
sh
Espa
ñ
o
l
Fra
nça
is
Portuguê
s
708981_URC-7140_21t_RDN-2300512:7950 Manual_gedrukt 30-05-12 10:38 Pagina 4
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC-7140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-7140 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 23,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All URC-7140

One for All URC-7140 User Manual - All languages - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info