492806
3
Zoom out
Zoom in
Previous page
1/17
Next page
Web Site : http://www.oneforall.com
5
Web Site : http://www.oneforall.com
4
FEATURES AND FUNCTIONS
The illustration below and the chart on the next three pages
describe the features and functions of the Cinema 6+ univer-
sal remote control. Use the drawing to locate each feature of
the remote, then refer to the chart for a description of what
function each feature performs.
FEATURE - FUNCTION
The Light (LED) flashes red to show
that the remote is working and is sending a signal.
The SETUP key is used to program your
Cinema 6+.
The POWER key controls power ON and OFF the
same as the POWER key on your original remote.
Please note that most CD Players do not have an
ON/OFF function on the original remote control. If
this is the case with your CD Player, then POWER
will have no effect on your CD Player.
The TV, VCR, DVD/LD, RCVR, CD and CBL/SAT
keys are used to select the home entertainment
component you want to control. If your component
does not respond when you press a key on the
remote control, press the appropriate device key
(TV, VCR, DVD/LD, RCVR, CD or CBL/ SAT) first to
tell the remote control which component you would
like the remote to operate.
The VOL (Volume Up), VOL (Volume Down) and
MUTE keys control the volume the same as the
Volume Up and Down and Mute keys on your
original remote.
The CH (Channel Up) and CH (Channel Down)
keys change channels the same as the Channel Up
and Down keys on your original remote. The
CH / keys also control the following functions in
other modes: DVD/LD mode = Skip Forward/ Skip
Reverse, RCVR and CD mode = Preset Up/Preset
Down.
The Digit keys (0-9) control direct channel access
the same as the Digit keys on your original remote.
The Digit keys (0-9) may also control the following
functions in other modes: RCVR mode = Input
Selections.
The ENTER key operates the same as the Enter key
on your original remote. If your original remote con-
trol required you to use an Enter key to change
channels, use the ENTER key on the Cinema 6+
after entering your channel number. The ENTER key
may also control the following functions in other
mode: RCVR mode = TAPE MON.
The PREV CH (Previous Channel) key operates the
same as the Last Channel or Recall key on your
original remote. The PREV CH key may also control
the following functions in other modes: DVD/LD,
RCVR and CD mode = Random.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 6800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 6800 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info