Manual One for All URC 5650 Cinema 5 (page 8 of 10) (English)

492766

Zoom out

Zoom in

1/10

Sansui 0321

Sony 0220, 0689

Soundesign 0078

Technics 0308

Victor 0331

Wards 0013, 0078

Yamaha 0354

Setup Codes For Miscellaneous Audio

Aiwa 0010, 0159

Fisher 0052

Harman/Kardon 0477

Jerrold 0459, 0520

JVC 0073

Nikko 0376

Paramount Pictures 0317

RCA 0056

Schneider 0376

Scientific Atlanta 0460

Sony 0010, 0159

Soundesign 0376

SSI 0317

Starcom 0459

Yorx 0376

RE-ASSIGNING DEVICE KEYS

You can use the

Cinema 5

to operate a second TV or a second VCR or any

combination of five home entertainment components. For example, you

may want your

Cinema 5

to control 1 TV, 1 Cable Converter, 1 Receiver

and 2 DVD Players. To accomplish this, you must re-assign one of the

device keys to operate the desired component, in this case, a second DVD.

The chart below shows you how to re-assign a particular device key and

then set up your new component.

TV to VCR SETUP* + 992 + VCR + TV + TV + SETUP*+

VCR code

TV to DVD/LD SETUP* + 992 + DVD/LD + TV + TV + SETUP* +

DVD or LD Player code

TV to RCVR SETUP* + 992 + RCVR + TV + TV + SETUP* +

Audio code

TV to CBL/SAT SETUP* + 992 + CBL/SAT + TV + TV + SETUP* +

Cable/DBS code

VCR to TV SETUP* + 992 + TV + VCR + VCR + SETUP* + TV

code

VCR to DVD/LD SETUP* + 992 + DVD/LD + VCR + VCR +

SETUP* + DVD or LD Player code

VCR to RCVR SETUP* + 992 + RCVR + VCR + VCR + SETUP* +

Audio code

VCR to CBL/SAT SETUP* + 992 + CBL/SAT + VCR + VCR +

SETUP* + Cable/DBS code

DVD/LD to TV SETUP* + 992 + TV + DVD/LD + DVD/LD +

SETUP* + TV code

DVD/LD to VCR SETUP* + 992 + VCR + DVD/LD + DVD/LD +

SETUP* + VCR code

DVD/LD to RCVR SETUP* + 992 + RCVR + DVD/LD + DVD/LD +

SETUP* + Audio code

DVD/LD to CBL/SAT SETUP* + 992 + CBL/SAT + DVD/LD + DVD/LD +

SETUP* + Cable/DBS code

RCVR to TV SETUP* + 992 + TV + RCVR + RCVR + SETUP* +

TV code

RCVR to VCR SETUP* + 992 + VCR + RCVR + RCVR + SETUP* +

VCR code

RCVR to DVD/LD SETUP* + 992 + DVD/LD + RCVR + RCVR +

SETUP* + DVD or LD Player code

RCVR to CBL/SAT SETUP* + 992 + CBL/SAT + RCVR + RCVR +

SETUP* + Cable/DBS code

CBL/SAT to TV SETUP* + 992 + TV + CBL/SAT + CBL/SAT +

SETUP* + TV code

CBL/SAT to VCR SETUP* + 992 + VCR + CBL/SAT + CBL/SAT +

SETUP* + VCR code

CBL/SAT to DVD/LD SETUP* + 992 + DVD/LD + CBL/SAT + CBL/SAT +

SETUP* + DVD or LD code

CBL/SAT to RCVR SETUP* + 992 + RCVR + CBL/SAT + CBL/SAT +

SETUP* + Audio code

*NOTE: Here (*) you must hold SETUP until the Cinema 5’s red light blinks

twice.

PROGRAMMING THE MACRO KEY

The

Cinema 5

has a Macro key (MACRO) that allow the user to play back a

series of keystrokes, at any time, with the press of the key. For example, to set

up a sequence that will turn on your components and change the components to

the proper inputs:

1. Press and hold SETUP until the

Cinema 5

’s red

light blinks twice, then release SETUP.

2. Press 9 - 9 - 5. The

Cinema 5

’s red light will blink

twice.

3. Press and release the MACRO key. This will be the key

that will play back the series of keystrokes assigned to that

key.

4. Begin entering the sequence of keystrokes, up to 15, that

you wish to be played back when you press the MACRO

key. To play back the macro you need to press the MACRO

key. For example:

RCVR + POWER + TV + POWER + TV/VCR (To change

the input on the TV to VIDEO 1) + CBL/SAT + POWER.

5. Once your sequence is entered, press and hold SETUP

until the

Cinema 5

’s red light blinks twice.

Now, using the example above, whenever the programmed MARCO key is

pressed, the Receiver would power ON, the TV will power ON and change the

input to VIDEO 1 and then the Satellite would power ON.

VOLUME LOCK

Volume Lock allows the user to designate which component will control the

volume in the TV, DVD/LD and CBL/SAT modes. To set the Volume Lock to the

TV mode:

1. Press and hold SETUP until the

Cinema 5

’s red

lightblinks twice, then release SETUP.

2. Press 9 - 9 - 3. The

Cinema 5

’s red light will blink

twice.

3. Press and release TV. The

Cinema 5’

s red light will

blink twice.

Now, whenever you press VOL▲, VOL▼ or MUTE in the VCR, DVD/LD and

CBL/SAT modes your TV will control the volume. If you would like to change the

Volume Lock setting to the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3,

only substitute the appropriate device key. Setting the Volume Lock to the TV,

VCR, DVD/LD or CBL/SAT mode will not effect the volume control in the RCVR

mode.

You can also change the Volume Lock setting so that an Audio component

controls the volume in all device modes. To change the Volume Lock setting on

the

Cinema 5

to the RCVR mode:

1. Press and hold SETUP until the

Cinema 5

’s red

light blinks twice, then release SETUP.

2. Press 9 - 9 - 3. The

Cinema 5

’s red light will blink

twice.

3. Press and release RCVR. The

Cinema 5

’s red light

will blink twice.

Now, whenever you press VOL▲, VOL▼ or MUTE your Audio component will

control the volume in all device modes.

You can also change the Volume Lock setting so that each component controls

its own volume. However, some components do not have volume control.

9-9-5

9-9-3

Using this setting may eliminate volume control in some device modes. To

change the Volume Lock setting on the

Cinema 5

so each mode controls its

own volume:

1. Press and hold SETUP until the

Cinema 5

’s red

light blinks twice, then release SETUP.

2. Press 9 - 9 - 3. The

Cinema 5

’s red light will blink

twice.

3. Press and release VOL▲. The

Cinema 5

’s red light

will blink twice.

9-9-3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 5650 Cinema 5 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 5650 Cinema 5 Manual

Product: