585204

One for All SV1730 - Wireless TV Sender Manual

3
Zoom out
Zoom in
Previous page
1/111
Next page
4
The Product
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Getting started
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table of Contents
Engli
s
h
T
he Audio Video Sender (SV-1730) is a solution for distributing audio and
v
ideo signals to every place in the house without the need of wires. The AV
Sender gives you the possibility to view any video source (satellite receiver,
video recorder, camcorder, DVD player, digital or analogue Set-Top Box or
Pay-TV decoder box) on your second TV in your home.
The One For All AV Sender (SV-1730) package contains:
- TRANSMITTER unit
- RECEIVER unit
- Infra-red (IR) Eye
- Two Power adapters
- Two “AV” cables
The TRANSMITTER sends the audio and video signals from the source
device (PVR, DVD, SATELLITE/ CABLE BOX, CAMCORDER, etc) by 5.8 GHz to
the RECEIVER that is connected to the destination device. The built in
Remote Control Extender sends the IR signal in the opposite direction
(from RECEIVER unit to TRANSMITTER unit) at a frequency of 433.92 MHz.
TRANSMITTER unit
The TRANSMITTER operates on 12 / 250 mA that is supplied by the AC/DC
Adapter (included in package). Connecting from the audio or video device
to the TRANSMITTER is done by the included AV cable labelled "transmit-
ter"). The Audio and/or video signals are transformed to a 5.8GHz
frequency that will be sent via the built-in antenna.
Furthermore the TRANSMITTER transforms the Remote Control Extender
signal (at 433.92 MHz) back to an IR command.
RECEIVER unit
The RECEIVER operates on 12 / 250 mA that is supplied by the AC/DC
Adapter (included in package). Connecting from the audio or video device
to the RECEIVER is done by the included AV cable "Receiver". The high
frequency signal (5.8GHz) received by this unit are captured by
the built-in antenna of the RECEIVER unit and will be transformed into the
original audio and video signals.
Secondly the RECEIVER has a built in remote control extender. When an
infra red signal is Received by the RECEIVER, it will transform the IR
command to 433.92 MHz and can be sent through walls and ceilings.
Please note that this feature is only accessable for devices that are
controlled via IR (infra-red) signals at a frequency of 30 - 60 kHz.
This feature does not support the 2-way IRDA waveform. If you are unsure
of the details of the remote control (IR) output, please refer to the manual
of the original device or contact your cable supplier.
The Product
SV-1730_21T_RDN-1031111_SV_1715_AV_Sender 17 talen 03-11-11 10:04 Pagina 4
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All SV1730 - Wireless TV Sender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All SV1730 - Wireless TV Sender in the language / languages: All languages as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info