504951

Omron RX I - HEM-632-E Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
English
7
Possible faults, their causes and rectification
Faults and their possible causes
Incorrect measurement is
indicated by E , EE or
E A correct reading was not possi-
ble because measurement was
impaired by movement or spea-
king, or owing to a very weak
arterial pulse. Possibly the cuff
was also not fitted correctly.
The cuff pressure does not rise
even though the pump motor
can be heard.
The batteries are weak or
exhausted
The display does not light up when
you press the ON/OFF button.
1. The batteries have run down.
2. The +/- poles of the batteries are
the wrong way round.
3. The battery contacts are dirty.
Rectification
Repeat the measurement keeping
perfectly still. Do not move your arm
or hand and do not talk.
Attach the cuff so that it fits closely.
Check that the cuff is firmly fitted to
the monitor. Contact supplier or
OMRON distributor for repair.
Fit two new LR03 alkaline batteries.
1. Fit two new batteries.
2. Insert the batteries correctly, as
shown by the symbols in the bat-
tery compartment.
3. Clean the battery contacts with a
dry cloth.
E
E
EE
Faults and their possible causes
The blood pressure values dis-
played are extremely low or high,
or they are implausible.
Rectification
Refer to the instructions and then
repeat the measurement.
In some rare cases there are people where this measuring method does not
work due to physical structure. In such cases OMRON recommends you to
consult a doctor.
Maintenance and storage
• For cleaning the monitor, only use a soft, slightly moistened cloth. Do not
use petrol, thinners or similar solvents.
• Stains on the cuff can be removed by carefully wiping with a moist cloth and
soap. Do not wash the cuff!
• Protect your blood pressure monitor against vibrations and do not leave it
in a place where temperatures are extremely low (below -20°C) or
extremely high (above +60°C).
• Do not use your monitor at very low (below 10°C) or very high (above 40°C)
temperatures.
• Do not carry out repairs of any kind yourself. If a defect occurs, consult
OMRON Customer Service or seek the advice of your authorised dealer or
chemist.
• If the cuff needs to be replaced, have this done by an authorised expert.
Disposal of this product and used batteries should be
carried out in accordance with the national regulations
for the disposal of electronic products.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omron RX I - HEM-632-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omron RX I - HEM-632-E in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info