504824
5
Zoom out
Zoom in
Previous page
1/7
Next page
4
3. Taking a Measurement
Measurement should be taken on a level and hard surface.
1. Tap the parts below
the right and left
sides of the platform
to turn on the power,
then lift your foot away from the
platform.
are displayed.
Note: If you leave your foot there, the
measuring is not going to be precise.
2. When is displayed, step onto
the scale.
The measurement starts. The result will be
shown when are
displayed in sequence.
Notes:
If you step onto the scale before
appears on the display, correct measurement
will not be possible.
The scale will automatically turn off 10
seconds after is displayed.
3. Check the measurement results.
The scale will be turned off automatically after 6
seconds.
Note: If the result is still unstable when
are displayed,
it will continue to cycle the display
till
measurement is stabilized and the
result is displayed. But if this process
lasts more than 10 seconds, and no
result is displayed, the scale will be
turned off automatically in 3 seconds
after Err is displayed.
4. Error Displays
5. Troubleshooting
Error Display Cause Correction
The weight is out of the weighing range
(more than 150 kg).
You did not lift your foot off the platform
after the power is just tapped on.
Lift your foot off first when the power is just
turned on.
Problem What to Check Correction
Power can not be tapped on Is the scale placed on ground level? Please place it on a level and hard
surface for use.
Battery power may be low. Please replace batteries.
Are the batteries wrongly inserted? Please insert the batteries as
illustrated in section 2. “Inserting
and Replacing the Batteries”.
Abnormal results are displayed Is the scale placed on ground level? Please place it on a level and hard
surface for use.
Was your foot still on the platform
after you switched on the scale by
tapping?
Please lift your foot away from the
unit immediately after you switched
on the scale by tapping. (Refer to
“3. Taking a Measurement”)
Care and maintenance
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omron HN-283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omron HN-283 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omron HN-283

Omron HN-283 User Manual - German - 6 pages

Omron HN-283 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info