651567
26
Zoom out
Zoom in
Previous page
1/28
Next page
22 |
Check the details below before contacting Technical Support for repair or service. If you need information or if
you have a problem, please contact the local Customer Care Center. When applying for after sales service, check
the manufacturer’s serial number or bar code.
THE APPLIANCE DOES NOT WORK.
Make sure the power cord is properly plugged in.
Check the hopper is assembled properly. If the hopper has not been properly locked in place, the appliance does
not work for safety reasons.
Check if the appliance has been assembled according to the manual in an ordinary manner.
See the assembly in the manual or consult with the local Customer Care Center for help.
THE HOPPER DOES NOT OPEN.
Is there alot of pulp left inside the bowl? Press [ON ] button to discharge internal pulp somehow.
Have you placed any foreign substances or solid objects such as hard seeds?
Press the [Reverse/REV] button to make foreign substances come up again toward the feeding tube.
Do not attempt to open it by force or with too much pressure. If it still does not work following by the above
process, contact the local Customer Care Center.
IT STOPS DURING NORMAL OPERATION.
Have you put heavy loads of ingredient or a thick/big ingredient? Read the manual Page 12 and follow Reverse/
REV button guidelines. If till the problem still has not been solved, contact the local Customer Care Center.
THERE ARE GATE MARKS (FORMING MARK) RESULTING FROM THE MOLDING PROCESS.
It is normal, and there is no problem for use.
WHAT IS THE DIFFERENCE BETWEEN FINE STRAINER AND COARSE STRAINER?
Regarding strainer selection for suitable ingredients, read the manual Page 3.
JUICE LEAKS OVER THE BASE.
Is Extraction packing properly inserted in?
Juice could leak when the extraction packing is not properly inserted. Please push the extraction packing
tight enough.
Juice is still leaking even though the extraction packing was inserted properly?
If an amount of input ingredient is too much compared to the size of pulp outlet, the packing may be slightly
pushed out and juice may leak through the gap. Do not process heavy loads at a time; squeeze little by little.
THE BOWL SHAKES WHEN SQUEEZING.
Slight shaking may be occurred due to motor movement.
Large or small movements occur depending on the pulp texture of ingredients (hard or tough).
It is normal when the screw is rotating. Please note that it is not a malfunction.
Hard ingredients (e.g:carrots/potatoes/radishes/beetroots etc.) may shake the bowl more than soft and juicy
ingredient.
TROUBLESHOOTING
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega VRT402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega VRT402 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info