Manual Omega O2 (page 3 of 12) (English)

651493

Zoom out

Zoom in

1/12

KNOW YOUR OMEGA JUICER

TO ASSEMBLE:

STEP 1 Place receptacle behind motor base housing.

STEP 2 Place bowl on motor base housing with

spout facing you and in the middle of the two raised

projections.

STEP 3 Place coupling on top of bowl with groove

in the middle, aligned with spout.

STEP 4 Place strainer basket inside bowl, making

certain that it rests flat on platform center hex nut.

STEP 5 Insert cutter blade inside strainer basket

with teeth up, centering it over hex nut.

STEP 6 Tighten nut finger tight. Do not over tighten.

STEP 7 Place cover on bowl with ejection chute

opening to rear.

STEP 8 Place tabs of latch arms over cover and secure.

STEP 9 Insert plunger in cover opening.

TO DISASSEMBLE:

STEP 1 Remove plunger from cover opening.

STEP 2 Release both side latch arms by inserting

fingers into the two side openings at the bottom of the

motor base housing and pulling outward and upward.

STEP 3 Remove cover.

STEP 4 Unscrew nut by turning counterclockwise.

STEP 5 Lift out bowl, basket and cutter blade together.

STEP 6 Remove strainer basket, coupling and blade

from bowl.

SPECIAL NOTE: The stainless steel basket is a

precision-engineered item that should be handled

carefully. This will help the juicer run efficiently,

smoothly, and for a very long time.

OMG-230_O2manual_v5.qxd 8/31/04 3:06 PM Page 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Omega O2 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Omega O2 Manual

Product: