651578
10
Zoom out
Zoom in
Previous page
1/12
Next page
CONTROL PANEL
Blade Agitator Assembly
Use caution when handling the blade; it is sharp. Use a soft cloth to grab
the blade when inserting the blade assembly through the container.
Retainer Nut and Blade Removal
The retainer nut is easily removed using the disassembling tool (DT).
Turn container upside down and insert the disassembling tool on the
holes of the nut. Push the tool counterclockwise to loosen nut (Step 1).
Once loosened, remove by hand.(Disassembly tool sold separately)
To release the blade use the other end of the DT while grabbing the
gear with backup pliers and turn counterclockwise (Step 2)
CARE AND CLEANING
Motor Base
1. Unplug the power cord.
2. Wipe outside surface with a damp soft cloth or sponge, which has
been rinsed in a mild solution of liquid dish soap and warm water.
NEVER IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID.
3. Wipe dry with a clean, soft cloth.
Control Panel
Gently wash the front panel with a soft cloth and low pH balance soap.
NOTE: Be sure to wring excess water out of cloth or sponge when cleaning
around the controls, drive socket or any electrical part.
MODEL CONTAINER CONTROLS
BL420/422 64 Oz. / 1800ml On/Off Switch High/Low Switch
BL430/432 82 Oz. / 2300ml On/Off Switch High/Low Switch
BL440/442 64 Oz. / 1800ml Off/Low/High Knob Pulse Switch
BL450/452 82 Oz. / 2300ml Off/Low/High Knob Pulse Switch
BL460/462 64 Oz. / 1800ml On/Off Switch Variable Speed Knob Pulse Switch
BL470/472 82 Oz. / 2300ml On/Off Switch Variable Speed Knob Pulse Switch
BL480/482 64 Oz. / 1800ml On/Off Switch Variable Speed Knob Timer Knob
BL490/492 82 Oz. / 2300ml On/Off Switch Variable Speed Knob Timer Knob
9
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega BL400 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega BL400 Series in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info