459952
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
EN
[ON]: Enables the alarm playback
function.
[OFF]: Disables this function.
1 Select [
ON
] and press the `
OK
button.
The “hour” will flash on the
display.
2 Press the + or button to change
the setting.
3 Press the `
OK
or 9 button to
set.
Repeat steps 2 and 3 to set the
“minute.
4 Press the + or button to select
between [
ONCE
] and [
DAIL
y
].
[ONCE]: Alarm playback will
be performed only once at the
specified time.
[DAIL
y
]: Alarm playback will be
performed at the specified time
every day.
5 Press the `
OK
or 9 button to
set.
"
The alarm tone stops automatically
if no button is pressed within 5
minutes after the alarm starts. The
file is not played back in this case.
If the starting times for timer
recording and alarm playback
are set for the same time, timer
recording will have priority.
LED [LED]
[ON]: LED light will be set.
[OFF]: LED light will be canceled.
System sounds [BEEP]
The recorder beeps to alert you of
button operations or warn you of
errors.
[ON]: Enables the beep function.
[OFF]: Disables this function.
"
If the alarm playback function has
been set, the alarm will sound at
the scheduled time even if the
system sounds are disabled.
File lock [LOCK]
Locking a file keeps important data
from being accidentally erased.
Select a file for the function before
locking.
[ON]: Locks the file and prevents it
from being erased.
[OFF]: Unlocks the file and allows it
to be erased.
Dividing files [DIVIdE]
(For VN-7700 only)
Files with large capacities and long
recording times can be divided to
make them easier to be managed.
Stop the file at the position in which
you want to divide it and apply the
setting.
[
y
ES]: Enables the file division.
[NO]: Cancels this function.
1 Select [
y
ES
] and press the `
OK
button.
File division begins and [DIVIdE]
flashes on the display.
"
The recorder cannot divide files
when the number of files in the
folder reached 200.
Locked files cannot be divided.
Do not remove the battery while
dividing a file. This may damage
the data.
File move [MOVE]
You can move files recorded in
folders [&], ['], [(] and [)] to other
folders. The moved file is added to
the end of the destination folder.
Select a file for the function before
moving.
[
y
ES]: Enables the file movement.
[NO]: Cancels this function.
1 Select [
y
ES
] and press the `
OK
button.
Current folder and file number
will flash on the display.
2 Press the 9 or 0 button to
select a destination folder.
3 Press the `
OK
button.
The destination folder and the
number of the moved file appear
on the display, and moving is
completed.
"
If the destination folder is full
(200 files), [FULL] appears on the
display, and you cannot move the
file to that folder.
A file cannot be moved to the same
folder.
Do not remove the batteries
during moving. This may damage
the data.
Formatting the recorder
[FORMAT]
If you format the recorder, all files
will be removed and all function
settings will return to defaults except
date and time settings. For important
recorded content, we recommend
you to make a note of it before
formatting the recorder.
[
y
ES]: Starts formatting the recorder.
[NO]: Cancels this function.
1 Select [
y
ES
] and press the `
OK
button.
[NO] will flash on the display.
2 Select [
y
ES
] again and press the
`
OK
button.
Formatting begins and
[FORMAT] flashes on the display.
[
END] appears when formatting
ends.
"
It may take over 10 seconds to
complete processing. Never
remove batteries during this time
because data may be corrupted. In
addition, replace the batteries with
new ones in order to ensure that
the batteries will not run out while
processing.
When the recorder is formatted, all
the saved data, including locked
files, are erased.
Troubleshooting
Q1: The power cannot be turned on.
A1: • The batteries may be depleted.
• The batteries may be inserted
incorrectly.
Check
= and - before inserting
new batteries.
• Are the terminals of the batteries
soiled?
If so, clean them with a dry cloth.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus VN7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus VN7600 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus VN7600

Olympus VN7600 User Manual - German - 10 pages

Olympus VN7600 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info