589209

Olympus FC-1 Macro Flash System Manual

3
Zoom out
Zoom in
Previous page
1/53
Next page
2 3
Thank you for purchasing the OLYMPUS Macro Flash System. Before use, please read this instruction manual to ensure
your safety, and keep it handy for future reference.
SAFETY PRECAUTIONS (Be sure to read and observe the following.)
This instruction manual uses a variety of common symbols and icons to assist you in proper handling and usage of this
product, and to warn you of potential hazards to yourself and others as well as to property. These symbols and their
significance are described below.
DANGER
Failure to observe the
precautions indicated by this
symbol may result in serious
injury or death.
WARNING
Failure to observe the
precautions indicated by this
symbol may result in injury
or death.
CAUTION
Failure to observe the
precautions indicated by this
symbol may result in injury or
property damage.
Symbols for prohibiting action Symbol instructing action
Prohibited
Disassembly
prohibited
Mandatory
This Macro Flash System has been designed exclusively for use with Olympus digital cameras. Do not connect the
Macro Flash System to a camera not manufactured by Olympus, as this may result in a malfunction or damage to the
camera and/or Macro Flash System.
DANGER
The Macro Flash System incorporates high-voltage circuitry. Never attempt to disassemble or modify it, as
this may result in electric shock and/or injury.
Do not touch the ring flash connector or twin flash connector terminals on the FC-1 Macro Flash Controller.
Do not use the Macro Flash System where it may be exposed to flammable or explosive gas. Otherwise, fire
ignition or explosion may result.
To prevent a traffic accident, do not direct the flash towards the driver of a car.
For customers in Europe
The “CE” mark indicates that this product complies with the European requirements for safety, health, environ-
ment and customer protection. CE-mark products are for sale in Europe.
For customers in USA
FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.
For customers in CANADA
This Class B digital apparatus complies with Canadian ICES-003.
WARNING
Do not fire the flash or AF illuminator light immediately in front of a person’s eyes (particularly an infant).
Exposure to the light from the flash at a very short range may cause irreparable injury to the eyes. Be espe-
cially careful to avoid using the Macro Flash System at a distance of less than 1 meter from an infant.
Do not leave the Macro Flash System and batteries within reach of children.
• If a child swallows a battery or small accessory, see a doctor immediately.
• If the flash is emitted near a child, their eyes may be injured irreparably.
• Moving parts of the Macro Flash System could injure a child.
Avoid the following actions to prevent fire or injury due to battery fluid leak, overheating, fire ignition or
bursting.
• Do not use batteries that are not specified for use with this Macro Flash System.
• Do not throw the battery in a fire, expose it to heat, short-circuit it, or disassemble it.
• Do not mix old and new batteries, or batteries of different types or brands.
• Do not attempt to recharge non-rechargeable batteries such as alkaline batteries.
• Do not load batteries with the +/– polarity reversed.
Do not store the Macro Flash System in a place exposed to excessive dust or moisture. Otherwise, fire or
electric shock may result.
Do not use the flash when it is covered by a flammable object such as a handkerchief.
Do not touch the light-emitting area after use. It will be very hot and could burn you.
If the Macro Flash System is dropped in water or any fluid gets inside, immediately remove the batteries and
contact your dealer or Olympus. Continued use could result in fire or electric shock.
If you notice any abnormalities such as leakage, discoloration, deformation, overheating, or odor, stop using
this device. Continued use could result in fire, overheating or explosion. Remove the batteries carefully to
avoid burning yourself and to prevent exposure to gas or dangerous fluids that may be released. For repair,
contact Olympus.
Always remove the batteries when you don’t expect to use the Macro Flash System for a long period. Other-
wise, heat generation or fluid leak from the batteries may result in fire, injury and/or contamination of the
surroundings.
Do not use a leaking battery. Doing so could result in fire or electric shock. Please contact your dealer or
Olympus.
Do not handle the Macro Flash System with wet hands. Doing so could result in electric shock.
Do not leave the Macro Flash System in a place where it may be exposed to high temperatures. Otherwise,
deterioration of parts or fire may result.
Do not take out the batteries immediately after using the Macro Flash System continuously for a long period.
Otherwise, the hot batteries may cause burns.
Do not deform the battery compartment or allow any foreign objects to get inside.
CAUTION
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FC-1 Macro Flash System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FC-1 Macro Flash System in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info