585035
2
Zoom out
Zoom in
Previous page
1/6
Next page
```
a
Current date
b
Recording mode indicator
c
Microphone sensitivity indicator
d
Total number of recorded fi les
for the date
e
Current le number
f
Elapsed recording time
g
Remaining recording time
a
b
c
d
e
f
g
```
Getting started
1 Inserting batteries 2 Turning on the power
Slide the POWER switch to the [ON] position.
Turning off the power:
While the recorder is in stop mode, slide the POWER switch to the
[OFF/HOLD] position.
Power save mode:
If the recorder is on and stops for 10 minutes or longer, the display
shuts off and it goes into power save mode. To exit power save mode,
press any button.
HOLD:
If you slide the POWER switch to the [OFF/HOLD] position, the
current conditions will be preserved, and all buttons and switches
will be disabled.
Strap hole
Strap is not supplied.
Battery indicator:
When [
] appears on the display, replace the batteries as soon as possible.
When the batteries are too weak, [
] and [Battery Low] appears on the
display and the recorder shuts down.
First, set the time and date.
“Setting time and date” (Verso)
“Changing the recording mode” (Verso)
Recording indicator light is lit while recording.
Pause
Microphone sensitivity
Turn the microphone in
the direction of the source
to be recorded.
High
Low
This is a highly sensitive mode which can record
surrounding noises. (
A
H
)
This is the standard
level of microphone
sensitivity. (
A
L
)
To ensure successful recordings, we recommend that you test the record function and
volume before use.
To ensure recording from the beginning, start recording after you see the recording
indicator light on.
Recorder will not be able to record anymore when [Memory Full] or [Maximum File
Size is reached] appears. Delete any unnecessary fi les before recording any further.
If the recorder is placed directly on a table when recording a conference, etc., the
vibrations of the table are likely to be recorded. To obtain a clear recording, place a
notebook or handkerchief between the recorder and the table to prevent the vibrations
from being recorded.
When remaining recording time is less than 60 seconds, the recording indicator light
starts fl ashing. When the recording time is decreasing to 30 or 10 seconds, the light
ashes faster.
Recording
Recording
Recording
Recording
When you use this recorder for the fi rst time after purchasing, or when you switch it on after removing the batteries for more than
30 minutes when exchanging batteries etc, the time will return to the default setting and the [Set Time & Date] will appear.
If the time and date are not set, the fi le is saved using default time and date.
High
Low
Playback
Playback
You can
also change
the recording
mode!
If the recorder is in recording mode and the REC (x)
button is pressed, recording pauses. If the REC (x)
button is pressed again, recording resumes.
The recorder will time out after 60 minutes
when left in [PAUSE].
Set the recording mode to match the surrounding conditions.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus DP-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DP-10 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus DP-10

Olympus DP-10 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info