770595
1
Zoom out
Zoom in
KEY FUNCTIONS
ON/AC Turns the calculator on
Clears all calculator contents (grand
total, memory, etc.)
CE/C Cancels the last entry
Each press shifts back 1 digit
GT First press displays the grand total memory
Second press clears the grand total memory
MU Performs mark-up calculations
M+ Adds the displayed value to the memory
M– Subtracts the displayed value from the memory
MRC First press recalls the memory total
Second press clears the memory total
GRAND TOTAL MEMORY (GT)
Every calculation result is automatically added to
the grand total memory.
Example 1: Press Result
ON/AC 0
2
÷
4 = 0.5
2 X 3 = 6.0000
GT 6.5
Example 2: Press Result
ON/AC 0
2 X 3 = 6.0000
100 - 15 % 85
GT 91
To recall the grand total memory, press the GT key
once. To clear the grand total memory, press the
GT key while displaying the grand total.
MARK-UP CALCULATION (MU)
The basic use of the Mark-Up (MU) key is identical
to using the % key to add a desired margin
percentage to the input number.
A complex use of the Mark-Up key is to calculate a
desired margin percentage based on the result of
the calculation (as opposed to the input number).
The following examples will both use a desired
margin percentage of 15% to illustrate the
difference between the two uses of the Mark-Up
calculation.
Example 1 (Mark-Up % based on input number):
Press Result
ON/AC 0
100 X 15 MU 115
{100+15%=115; however, 115-15%=97.75}
Example 2 (Mark-Up % based on result):
Press Result
ON/AC 0
100
÷
15 MU 117.647058823
{100+15%=115; however, 117.647058823-15%=100}
SOLAR
DESKTOP
CALCULATOR
INSTRUCTIONS
Control Company Cat. No. 6032
© 2009 Control Company. 92-6032-00 Rev. 2 090309
BATTERY REPLACEMENT
The primary power for the calculator comes from
the solar cell; however, the backup battery will
provide power for low light conditions. Erratic
readings, a faint display, or no display are all
indications that the backup battery must be
replaced. Remove the battery cover, located
on the back of the unit. Remove the exhausted
battery and replace it with a new AA alkaline
battery. Make certain to insert the new battery
with the proper polarity as indicated by the
illustration in the battery compartment. Replace
the battery cover.
WARRANTY OR SERVICE
For warranty or service contact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail sales@control3.com • www.control3.com
Control Company is ISO 9001 Quality-Certifi ed by
DNV and ISO 17025 accredited as a Calibration
Laboratory by A2LA.


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia lcd-312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia lcd-312 in the language / languages: English as an attachment in your email.

The manual is 0.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info